Jump to content

HDX900 firwire downconvert?


Daniel Christie

Recommended Posts

The downconvert is only for one of the video out feeds.

 

So does that mean that down conversion is only an option for SDI and analogue outs, or could it potentially be used for conversion to 576i (in PAL land) DV25 or DV50? I know some of the decks can do it, but I suspect that the HDX cannot. Can you confirm this?

 

Thanks heaps,

 

Daniel

Link to comment
Share on other sites

The downconverter in the HDX900 is only for the SD-SDI or composite video output. It will not send a DV25 or DV50 feed. Whether shooting at 720p or 1080i, when shooting at frame rates of 24, 30 or 60 the downconvert is NTSC and when shooting at 25 or 50 the downconvert is PAL. Nothing but HD through the Firewire.

Link to comment
Share on other sites

The downconverter in the HDX900 is only for the SD-SDI or composite video output. It will not send a DV25 or DV50 feed. Whether shooting at 720p or 1080i, when shooting at frame rates of 24, 30 or 60 the downconvert is NTSC and when shooting at 25 or 50 the downconvert is PAL. Nothing but HD through the Firewire.

 

Thought that was the case, thanks for clearing it up.

 

Cheers,

 

Daniel

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...