Steve Milligan Posted July 19, 2008 Share Posted July 19, 2008 I'm having an intermittent rubbing problem in the S16 area of a converted NPR. You can see a frame demonstrating the issue here: http://www.ghostmap.com/images/Eclair_rub.jpg I've photoshopped the lower right corner for clarity. It happens with both mags (both of which have had the rollers modified). My suspicion is that the aperture plate, which still has both 16mm ridges intact, is the culprit. Does this seem likely? Can I/should I have it milled down on that side? Any other theories on what it might be? The camera was recently serviced, and otherwise works nicely. Thanks, Steve Link to comment Share on other sites More sharing options...
Steve Milligan Posted July 30, 2008 Author Share Posted July 30, 2008 Just wanted to give this a bump before I give up...any Eclair veterans out there who can enlighten me? Link to comment Share on other sites More sharing options...
Premium Member David Auner aac Posted July 30, 2008 Premium Member Share Posted July 30, 2008 Hi Steve, sorry, I'm not the NPR expert (yet) as mine is still sitting in the tech's shop. But your theory sounds about right. Best call a tech like Bernie O'Doherty or Les Bosher and ask them. Cheers, Dave Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now