Jump to content

URGENT help needed for film finish project


petersant

Recommended Posts

Hi All,

 

 

I have finished editing and sent of the neg to be cut with a cutting list fom FCP. However, the neg cutter wants an EDL not a Cutting list based on the Key numbers. This is where I'm stuck.

 

Ok so here is what I've done so far.

 

Shot 16mm @ 24fps

 

Transfered at 25fps with FLEx files (camera rolls and timecode) plus burn-ins

 

Inputed FLEx files into Cinema Tools and batch captured in FCP

 

Conformed the footage to 24 in Cinema Tools

 

Edited with sequence settings at DV PAL 48kHz - 24

 

 

So I managed to output a cutting list from FCP with the Keycode and checked it with the footage. 99% was ok but 1 frame out in 2 of the 140 shots. Now the Neg cutter wants a timecode EDL.

 

How do I now output timecode EDL?

 

Was I right to conform to 24 or shall I reconform to 25?

 

Please, please help this is for my final work on my MA and can't afford to have it go wrong.

 

 

Many thanks in advance,

Link to comment
Share on other sites

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...