Jump to content

Promist 1/4 creating double images/reflections. Why?


joshuajonesctva
 Share

Recommended Posts

I have been testing out my new filter. I'm trying to mimic the Robert Richardson style. I used my Dedolight 150, pointed it straight down to the floor, and had a friend stand under it. There was a double image or reflection of the image back into the lens when I had the filter on. I was using my lens hood and removed the bounce board but it stayed there. What's the deal?

Link to comment
Share on other sites

  • Sustaining Member

I wonder if using a 4x5 filter in a matte box would movie the filter out far enough from the front of the lens to reduce the double reflection, or just make it smaller. Obviously the bright edge in the subject is reflecting on the face of your lens onto the back side of the filter. Normally a lens front has enough of a curve and is somewhat recessed to minimize this, but I guess your lens has a flat enough face to make it a problem, and you probably can't get the round filter any tighter to the front of the lens.

 

A titlable filter in a mattebox can allow the reflection to move higher or lower in the frame, sometimes all the way out of the filter is tilted enough.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

Forum Sponsors

Film Gears

Serious Gear

Metropolis Post

Abel Cine

Tai Audio

New Pro Video - New and Used Equipment

VidGear.com - Broadcast Video Warehouse

Visual Products

Gamma Ray Digital Inc

Broadcast Solutions Inc

FJS International

CineLab

Wooden Camera

Cinematography Books and Gear



×
×
  • Create New...