Jump to content

Adapter for using Arri Standard Mount Lens on Aaton Mount camera


 Share

Recommended Posts

Hello everyone,

 

I have a simple question: which adapter should I use when planning to use a lens in Arri Standard Mount on a camera with Aaton Mount? Is a "Arri Bayonet to Aaton" adapter doing the job? I can't seem to find a "Arri Standard to Aaton" adapter.

 

Thanks in advance for your help!

Link to comment
Share on other sites


Arri Bayonet mounts work in a different way. Usually standard mount adapters have grub screws that tighten into the groove on the lens mount, Bayonet mount adapters usually have a rotary action that compresses onto the two projecting lugs that project from that lens mount.

Edited by Brian Drysdale
Link to comment
Share on other sites

Try this:

http://www.ebay.com.au/itm/like/251393083950?limghlpsr=true&hlpv=2&ops=true&viphx=1&hlpht=true&lpid=107

 

It's a little confusing because most Standard mount lenses will fit a camera with Arri Bayonet mount (Arri designed the newer B mount to still accept older lenses), but it usually doesn't work that way with adapters.

Link to comment
Share on other sites

  • 7 years later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...