John Burrows Posted August 22, 2014 Share Posted August 22, 2014 I hope this my first post is in the correct place!. I have been given an old Hanimex projector and have got it working, but the take up spool does not revolve for some unknown reason. It has the belt attached but does not turn, everything else seems to be working fine and the pictures are ok, so I must be missing something. Can anyone give me a clue please as I would really like to completely restore this old machine to fully working order. Any information will be gratefully received. Thanks, John Link to comment Share on other sites More sharing options...
Joerg Polzfusz Posted August 22, 2014 Share Posted August 22, 2014 Hi, there are normally two problems with older projectors: Rubber belts have deteriorated. They now either turn to glue, break into small pieces or are too slippery to operate correctly. The take-up arm's friction clutch has deteriorated (as it's made of cork in some projectors). Hence the reel doesn't move even though the belts, motors, ... perform correctly. The second problem is more a related to 16mm or larger. This is because the reels aren't that heavy for standard8/super8 and hence some (or even most) standard8/super8-projectors don't even have a friction clutch. Therefore I can't tell whether the second problem could occur with your projector. ;-) BTW: Are you sure that all knobs, triggers, dials etc. are at the correct position? Some of the projectors do have a "film removal from path"- or "threading"-mode where some functions might be set to "idle"... ;-) Good luck, Jörg Link to comment Share on other sites More sharing options...
John Salim Posted August 22, 2014 Share Posted August 22, 2014 (edited) John, Why not try asking on this forum... www.16mmfilmtalk.com There'll be many more folk on there able to help with 8mm & 16mm film projection / equipment. John S :rolleyes: Edited August 22, 2014 by John Salim Link to comment Share on other sites More sharing options...
John Burrows Posted August 22, 2014 Author Share Posted August 22, 2014 Wow! thank you for the quick replies, brilliant. The belts are fine, in fact they are the original coiled spring ones, although there is a spare rubber one in the box, there are a couple of knobs on the side that don't seem to do anything at all when turn either way, so could possibly be something to do with it. Anyway thanks for the prompt advice I'll carry on experimenting. John :unsure: Link to comment Share on other sites More sharing options...
John Salim Posted August 22, 2014 Share Posted August 22, 2014 John, Why not try asking on this forum... www.16mmfilmtalk.com There'll be many more folk on there able to help with 8mm & 16mm film projection / equipment. John S :rolleyes: Seems the link above dosn't work for some reason, use this one.... www.16mmfilmtalk.com/ John S :( Link to comment Share on other sites More sharing options...
Josh Gladstone Posted August 22, 2014 Share Posted August 22, 2014 Maybe if you post a few pictures of the inside of the projector, someone might be able to spot the problem? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now