Ben Joyner Posted January 13, 2015 Share Posted January 13, 2015 Hey guys, Does anyone know of a good place to purchase Kino flo party colored tubes? Looking to buy some color tubes (blue,red.) Can't seem to find them available for purchase online, but I know they exist. Thanks! -Ben Joyner Cinematographer // benjoyner.com Link to comment Share on other sites More sharing options...
James Compton Posted January 13, 2015 Share Posted January 13, 2015 Ben, You have many more options if you go with T8 or T12 colored sleeves : http://www.lightbulbdepot.com/subcategory.asp?sub=285 It's much cheaper and you can use the same bulbs for a special scene that you would use for normal scenes. Link to comment Share on other sites More sharing options...
Ben Joyner Posted January 13, 2015 Author Share Posted January 13, 2015 Thank you James! Link to comment Share on other sites More sharing options...
James Compton Posted January 13, 2015 Share Posted January 13, 2015 Ya got it. Link to comment Share on other sites More sharing options...
Ben Joyner Posted January 13, 2015 Author Share Posted January 13, 2015 What's the difference between t8 and t12? Also, can you cut them easily? Looking to use them with 2 ft tubes. Link to comment Share on other sites More sharing options...
Premium Member Adrian Sierkowski Posted January 13, 2015 Premium Member Share Posted January 13, 2015 Differing sizes of bulb. Kinos are T12, T8 are the thinner ones. I suppose you could cut them The other option is clear tape and cutting little bits of gel for your lights. Link to comment Share on other sites More sharing options...
Premium Member David Mullen ASC Posted January 13, 2015 Premium Member Share Posted January 13, 2015 An explanation of T12 vs. T8 bulbs here: http://www.ehow.com/about_5426758_fluorescent-t8-vs_-t12-bulbs.html?ref=Track2&utm_source=ask Link to comment Share on other sites More sharing options...
James Compton Posted January 13, 2015 Share Posted January 13, 2015 What's the difference between t8 and t12? Also, can you cut them easily? Looking to use them with 2 ft tubes. Ben, You can cut them with a razor or boxcutter. Measure the sleeve to the size that you want to cut, mark it with a Sharpie. Lay them on a flat surface, press the area that you want to cut flat and then slice with the razor. It's a dense plastic material so apply a decent amount of pressure. That vendor has a store in Atlanta that can ship to you in Savannah. Link to comment Share on other sites More sharing options...
James Compton Posted January 13, 2015 Share Posted January 13, 2015 Ben, One more thing. Get an electric blanket and wrap it around the area BELOW the section to be cut. Turn the blanket on the low setting and leave it wrapped around the sleeve for 2 minutes. It softens the plastic material, making it much easier to cut. A good way to remember the difference between a T8 and T12: A T8 is roughly the diameter of a U.S. quarter. The T12 is almost the same diameter as a U.S. silver dollar coin. The lengths and shapes( U bend, circline, etc.) will vary. The diameter of a T8/T12 remains constant. 1 Link to comment Share on other sites More sharing options...
Ben Joyner Posted January 13, 2015 Author Share Posted January 13, 2015 Gotcha! I guess I've just only been using fixtures for t12 tubes. That makes sense. Thanks! Link to comment Share on other sites More sharing options...
Premium Member Phil Rhodes Posted January 13, 2015 Premium Member Share Posted January 13, 2015 If you're after the coloured types, people other than kino-flo do sell them. P Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now