Josh Tree Park Posted April 19, 2016 Share Posted April 19, 2016 Hi everyone,I'm planning for a music video shoot and we had an idea to rig a series of Kino lights as stage decorations and have them flicker on and off continually - such example of the setup is shown like this : https://www.youtube.com/watch?v=loNuTsyN1r8The Solutions - Movements MV - 0:05 ~ 0:15So my questions is - I understand the lights are rigged using Kino Flo's harnesses, but how would I make a whole bunch of them flicker individually using Kino Flo's? I don't think there is a way to hook them up on a DMX board, so is the only way to make them really flicker is to have someone standby the ballast and rapidly turn on/off the switches? Would that damage the bulbs if we are scheduling for 8 hour shoot day? Thank you all for your opinions. Link to comment Share on other sites More sharing options...
Jean Gonzales Posted April 19, 2016 Share Posted April 19, 2016 (edited) Kino Flo does have DMX controlled ballasts However, looking at the fixtures I suspect that in your example they are using LED tubes. Not Kino's Here are some options what you can do with a LED tube and some basic DMX knowlegde: https://www.youtube.com/watch?v=Ve1QibVD_Ko Turning the switches on the ballast on and off all day will without a doubt damage them. Edited April 19, 2016 by Jean G Link to comment Share on other sites More sharing options...
Premium Member Adam Frisch FSF Posted April 19, 2016 Premium Member Share Posted April 19, 2016 A little trick - if you get normal fluorescent tubes and fixtures, and dim the incoming voltage on a normal inline dimmer, they will start to flicker. It will kill the the igniters pretty fast, but it's a cheap way to achieve that look. But it's all random, you can not predict when or at what voltage they will start to flicker. Nor can you control any sort of sequence etc. Don't do it with Kino ballast though, or you'll probably destroy them. Link to comment Share on other sites More sharing options...
Premium Member Adrian Sierkowski Posted April 20, 2016 Premium Member Share Posted April 20, 2016 You could also get T12 fixtures/ballasts (cheapo) and throw kino tubes in them. Else for anything programmable, your best bet is going to be the LED styled T tubes these days. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now