ARRI D21 and CODEX 3010 ARRIRAW problem! Help!

[Andrius Zemaitis]

I have a problem in connecting ARRI D21 and CODEX 3010 to record ARRIRAW format.

 

My situation: I set ARRI D21 camera internal settings to ARRIRAW format, output HD-SDI1 frame rate 24fps. Then I set CODEX internal parameters: format ARRIRAW 2880 / 24fps. I connect camera and recorder with DUAL sdi cable in proper order A with 1 and B with 2.

 

And then CODEX says "Input video signal wrong type: HD1080p@"

 

I was readed ARRI D21 manual and setup, and connect system as it was showed in manual. I dont know where is the problem?

 

What I do wrong?

 

Looking forward.

 

Please help me on this insulting case...

[Peter Milanov]

Have you set the user mode to Advanced?

[Andrius Zemaitis]

Thanks for comment. I was speak with CODEX guys and already solve the problem. Everything works fine. But I have other problem. I dont have DOCK station and cant transfare data from codex to PC.

Is it possible to somehow connect device via Ethernet cable?

Second question if I buy Dock transfare station for codex is it suitable to Windows user?

[Hale Mednick]

Hi Andrius, what did the Codex guys tell you.  I'm having this problem too and I'm stumped.  I keep getting a timecode break error message as well.