Pascal Steinhaeusser Posted March 28, 2019 Share Posted March 28, 2019 Hello, Was wondering if any of you ever used a Skypanel S60 with an Anton bauer Cine VCLX block battery? I know battery voltage of Cine VCLX has max 28v (3pin XLR) which reduces light output from S60. My question is mainly regarding cabling in order to power the Skypanel on this type of battery. Arri don't seem to have/sell a cable or adapter from Battery input on the head 23-36V DC (4 pin XLR) to 28V (3 pin XLR) output on the Cine VCLX. Do you, in that case, DIY the cable? In which case, what recommendations do you have for AWG of cabling, max length and/or other useful information regarding wiring specs would you have for me? Thank you! Quote Link to comment Share on other sites More sharing options...
Ed Conley Posted March 29, 2019 Share Posted March 29, 2019 (edited) Do you already own the Cine VCLX battery? If you are looking to purchase a battery set up: Contact Block Batteryhttps://blockbattery.com Image of Dual battery set up.https://www.adoramarentals.com/p-~bbs60bkit/BLOCK-BATTERY-48V-KIT-FOR-SKYPANEL-S60 Edited March 29, 2019 by Ed Conley Quote Link to comment Share on other sites More sharing options...
Ed Conley Posted March 29, 2019 Share Posted March 29, 2019 I send out Goal Zero Lithium batteries with Skypanels too.Goal Zero Yeti 1000 Lithium Will run a -SkyPanel s-60 for about 2 hours @ Max Power(Plus or Minus) - SkyPanel s-30 for about 4 house @ Max Power (Plus or Minus) - Kino Flo Select 30 for about 10 Hours - LiteGear LiteMat for 5+ hours - Litepanels Astra 1x1 for 10+ hours Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.