Jump to content

Using a Skypanel S60 with a Cine VCLX Block Battery


Recommended Posts

Hello,

Was wondering if any of you ever used a Skypanel S60 with an Anton bauer Cine VCLX block battery?
I know battery voltage of Cine VCLX has max 28v (3pin XLR) which reduces light output from S60.
My question is mainly regarding cabling in order to power the Skypanel on this type of battery.

Arri don't seem to have/sell a cable or adapter from Battery input on the head 23-36V DC (4 pin XLR) to 28V (3 pin XLR) output on the Cine VCLX.
Do you, in that case, DIY the cable? In which case, what recommendations do you have for AWG of cabling, max length and/or other useful information regarding wiring specs would you have for me?

Thank you!

Link to comment
Share on other sites

I send out Goal Zero Lithium batteries with Skypanels too.

Goal Zero Yeti 1000 Lithium

Will run a 
-SkyPanel s-60 for about 2 hours  @ Max Power(Plus or Minus)
- SkyPanel s-30 for about 4 house @ Max Power (Plus or Minus)
- Kino Flo Select 30 for about 10 Hours
- LiteGear LiteMat for 5+ hours
- Litepanels Astra 1x1 for 10+ hours
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...