Jump to content

Arri 16SR 11 pin fisher connector remote start


Bernhard Kipperer

Recommended Posts

Could anyone please tell me how the remote start/stop is handled on the Arri 16SR?

To my understanding, there is the 11 pin fisher socket and according to a diagram I have found, pin 7 would be used for start/stop, 9 for ground and 11 for +12.6V.

Nothing more is mentioned there however. Is ground and +12.6V used to supply the attached etxernal device?

How is starting/stopping achieved? Is pin 7 being pulled high shortly (To what voltage? Connected to pin 11?) to trigger a start and pulled again to stop it? Or is it signalled differently?

Thanks!

Link to comment
Share on other sites

  • Premium Member

Remote start/stop is activated by connecting pin 7 to the +12V on pin 11. It's been many years so I can't remember if it only needs to be a momentary connection or a constant one.. I think maybe it was constant on SR1s and 2s and momentary on (3 pin RS socket) SR3s..

12V accessories are powered off pin 9 and 11.

Link to comment
Share on other sites

  • 2 weeks later...
  • 4 years later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...