Taylor Bickel Posted November 5, 2019 Share Posted November 5, 2019 I work a lot with a guy who has really old Norms C-Stands. The grip heads seem to be looser and looser after every job. You really have to tighten them down a ton. Is there any way of bringing these old heads back to their former glory, or do we just have to buy all new heads? Link to comment Share on other sites More sharing options...
Gregg MacPherson Posted November 6, 2019 Share Posted November 6, 2019 The old Matthews ones I have use a cork wafer/friction washer. You could add that if they needed it. Make your own washer out of cork from the auto parts shop if you can't find them. Same stuff as used for valve cover gaskets etc. Link to comment Share on other sites More sharing options...
Mark Dunn Posted November 6, 2019 Share Posted November 6, 2019 Use contact glue to attach the cork- I think you may know it as contact cement. The stuff you leave to get tacky before joining the surfaces. Link to comment Share on other sites More sharing options...
Gregg MacPherson Posted November 6, 2019 Share Posted November 6, 2019 (edited) I didn't glue mine. Meant to add that the gasket material was about 2mm (1/16"). I just looked at the Matthews parts store and these washers are $10/ each. 2-1/2' and 4-1/2' sizes available. Edited November 6, 2019 by Gregg MacPherson data error Link to comment Share on other sites More sharing options...
Ed Conley Posted November 7, 2019 Share Posted November 7, 2019 yup- pick up some gasket material- no need to glue. 1 Link to comment Share on other sites More sharing options...
Max Field Posted November 7, 2019 Share Posted November 7, 2019 I don't see a point in repairing them when they're so cheap to begin with:https://www.bhphotovideo.com/c/product/371923-REG/Impact_KCP_200_Grip_Head_2_5.html 1 Link to comment Share on other sites More sharing options...
Gregg MacPherson Posted November 7, 2019 Share Posted November 7, 2019 Gosh, $18 is really cheap for the head. But consider these thoughts.. -The older brand C stands can last a very long time. They may be worth repairing or maintaining. -Replacing the cork washer is a maintenance issue, that any head may need. -The cork sheet is very cheap and cutting to shape is very easy. 1 Link to comment Share on other sites More sharing options...
JD Hartman Posted December 1, 2019 Share Posted December 1, 2019 POS made in China. Looks like a poor copy of an American Grip head. Many complaints about not tightening or staying tight, etc, etc. Look at what most lighting and grip houses send out, that's hardware that lasts. Link to comment Share on other sites More sharing options...
Max Field Posted December 1, 2019 Share Posted December 1, 2019 I mean I've hammered nails with these and they still work well. I prefer them to Matthews gripheads because the tightening handle is ergonomic for my big hands. How many years do we need our grip heads to last here? Link to comment Share on other sites More sharing options...
JD Hartman Posted December 3, 2019 Share Posted December 3, 2019 Gripheads, with minimal care and maintenance, since they are cast Al, should last virtually forever. Were that not true you wouldn't see used but fully functional American Grip, Matthews, Modern, Norms and even Mole gripheads for sale. Impact gripheads will be in the scrapyard. Link to comment Share on other sites More sharing options...
Max Field Posted July 8, 2021 Share Posted July 8, 2021 Wanted to update that I've been using the exact same impact grip heads for 2 more years and still not a single issue. Link to comment Share on other sites More sharing options...
Premium Member Aapo Lettinen Posted July 12, 2021 Premium Member Share Posted July 12, 2021 with the local prices here the Avenger gripheads are the best price/quality ratio so I am using those. The Matthews ones are also good if rented but they are more difficult and expensive to purchase than Avengers. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now