Premium Member Tyler Purcell Posted April 7, 2020 Premium Member Share Posted April 7, 2020 19 hours ago, David Sekanina said: I looked again at the AZ full HD tap for the XTR Prod (PDF and video) and it has the exact same rolling bar at 24fps. Yea, it's just harder to see on his video. It's no really "flicker" it's the typical mirror and camera out of sync bar that happens when there is half a black frame on certain frames. It's quite common when using a standard 3 blade film projector to capture video with a home camcorder. Yea it's not the end of the world. Thanks for clarifying. Link to comment Share on other sites More sharing options...
Premium Member David Sekanina Posted September 12, 2020 Author Premium Member Share Posted September 12, 2020 Unfortunately I had to cancel the video tap - there have been changes to the sensor board I was unaware of, since my prototype. Luke and Brody have been refunded. I am profoundly sorry for not catching this earlier - mea culpa. Link to comment Share on other sites More sharing options...
Arron Monkman Posted October 18, 2021 Share Posted October 18, 2021 hey, this is very cool. I’m a prod owner with an sd b&w tap, wud love to know more about possibilities of updating the tap and the plates look groovy too! please get in touch to chat arron.monkman@hotmail.com Link to comment Share on other sites More sharing options...
Premium Member David Sekanina Posted October 18, 2021 Author Premium Member Share Posted October 18, 2021 Hi Arron - I no longer sell the tap nor the cheese plates - try AZ Spectrum for a tap. Link to comment Share on other sites More sharing options...
Arron Monkman Posted October 18, 2021 Share Posted October 18, 2021 Hey David, that is a shame! Thanks for replying to me though Link to comment Share on other sites More sharing options...
Premium Member David Sekanina Posted May 16, 2022 Author Premium Member Share Posted May 16, 2022 (edited) I get a lot of requests recently for the cheese plate. It is sold out and I wont manufacture new ones. The video tap for the XTR Plus and XTR Prod will be upgraded and available by July/August with an internal DC/DC, an iris control for very bright scenes, and click wheel for the settings. It'll be around the same price as the one from VP and AZ. Edited May 16, 2022 by David Sekanina 3 Link to comment Share on other sites More sharing options...
Boris Kalaidjiev Posted June 3, 2022 Share Posted June 3, 2022 Looking forward to it! Have you fitted a different camera inside or is it the same camera with a different housing? Link to comment Share on other sites More sharing options...
Premium Member David Sekanina Posted June 3, 2022 Author Premium Member Share Posted June 3, 2022 Different board, same Sony sensor, same functions. Link to comment Share on other sites More sharing options...
Chris Burke Posted June 3, 2022 Share Posted June 3, 2022 I own an XTR Plus and am very interested in a HD tap. Please keep me posted. chris Link to comment Share on other sites More sharing options...
Premium Member David Sekanina Posted June 3, 2022 Author Premium Member Share Posted June 3, 2022 If you're based in the US, it's probably easier to get one from AZ or VP. The new tap cannot be installed by the user. If you really want mine bc of the click wheel or any other reason, I can ask Charles Pickel if he's interested in doing the installation. You must have a body with the side video tap port (not all XTR Plus do) and the beam splitter and relay lens installed. ? Link to comment Share on other sites More sharing options...
Boris Kalaidjiev Posted June 13, 2022 Share Posted June 13, 2022 I am based in Europe, Bulgaria. I have a XTR Prod with a VR46 Color video tap. That should work, right? Link to comment Share on other sites More sharing options...
Premium Member David Sekanina Posted June 13, 2022 Author Premium Member Share Posted June 13, 2022 7 hours ago, Boris Kalaidjiev said: I have a XTR Prod with a VR46 Color video tap. That should work, right? Yes, that will work ? 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now