Premium Member Justin Hayward Posted October 23, 2020 Premium Member Share Posted October 23, 2020 (edited) Shot this for a friend the other day and I think it turned out nice, so I'm sharing it with you nice folks. It was shot 4k with the Phantom on the Kira motion control rig @1000fps. Lit with a single 5k through a 2x3 1000H frame with some small fill cards for reflections. Edit: There was a 2k fresnel hitting a small part of the background so it didn't fall totally off to black. Edited October 24, 2020 by Justin Hayward 2 Link to comment Share on other sites More sharing options...
Premium Member Justin Hayward Posted October 23, 2020 Author Premium Member Share Posted October 23, 2020 Here's a quick behind the scenes of the rigging if you're interested... Link to comment Share on other sites More sharing options...
Robin R Probyn Posted October 24, 2020 Share Posted October 24, 2020 Nice one sir ! 1 Link to comment Share on other sites More sharing options...
Premium Member Justin Hayward Posted October 24, 2020 Author Premium Member Share Posted October 24, 2020 Thanks Robin! Link to comment Share on other sites More sharing options...
Premium Member Phil Rhodes Posted October 24, 2020 Premium Member Share Posted October 24, 2020 Is it complicated or longwinded to set up the moco? I would imagine there's some trial and error with getting the liquid to land right and the follow to be nice. Link to comment Share on other sites More sharing options...
Premium Member Justin Hayward Posted October 24, 2020 Author Premium Member Share Posted October 24, 2020 With the pour rig pre-built, it was about a 7 hour day. Because it was a favor for a friend and everybody working on it was doing a favor for me, I was really hoping to get it done in the morning, but this kind of stuff is never fast. Plus it wasn't a full crew and the guy rigging was doing like three jobs. Getting the liquid to land in the right spot took the most time. If you just tip the bottle over, the water will go flying all over the place, so the bottle has to actually move backwards while tipping over to get the liquid to pour straight down and hit where you want. Most of the morning was the camera planted on the glass while we dialed in the pour with water. Then we switched to wine, but the density of the alcohol changed the pour and we basically had to start over. We eventually used water with food coloring. It looked more like rose than the actually wine did anyway and it was easier to control the pour. After we got the pour right we dialed in the camera move. That's a little easier because you basically start with a guess, but @1000fps it's easy to see if it needs to move a little faster or sooner or slower or whatever. I think it only took four or five tries before the camera was locked in. The guy doing the rigging is one of the smartest people I've ever met and he comes up with all sorts of crazy stuff. I shot a little behind-the-scenes of something he did with another director last year... Link to comment Share on other sites More sharing options...
Premium Member Satsuki Murashige Posted October 24, 2020 Premium Member Share Posted October 24, 2020 Looks really great Justin! You guys nailed it. 1 Link to comment Share on other sites More sharing options...
Premium Member Justin Hayward Posted October 24, 2020 Author Premium Member Share Posted October 24, 2020 1 hour ago, Satsuki Murashige said: Looks really great Justin! You guys nailed it. Thanks Satsuki! I always enjoy demo-type stuff like this cause you get to catch up with your friends while playing with cool equipment, but without any agency or client breathing down your neck (of course they can't do that now anyway :). Link to comment Share on other sites More sharing options...
Premium Member Satsuki Murashige Posted October 24, 2020 Premium Member Share Posted October 24, 2020 1 minute ago, Justin Hayward said: ... but without any agency or client breathing down your neck (of course they can't do that now anyway :). Oh, don’t be too sure about that! I’m finding that crowding around a monitor is a nearly impossible habit to break... 1 Link to comment Share on other sites More sharing options...
Premium Member Justin Hayward Posted October 24, 2020 Author Premium Member Share Posted October 24, 2020 35 minutes ago, Satsuki Murashige said: Oh, don’t be too sure about that! I’m finding that crowding around a monitor is a nearly impossible habit to break... That's so true. This place has 7 or 8 really nice monitors spread out all over, but everyone still flocks around one. It's tough cause you want to talk about it and everything. And when you're in the thick of a job it's easy to forget all the stuff going on in the world. Link to comment Share on other sites More sharing options...
Premium Member Satsuki Murashige Posted October 24, 2020 Premium Member Share Posted October 24, 2020 7 minutes ago, Justin Hayward said: That's so true. This place has 7 or 8 really nice monitors spread out all over, but everyone still flocks around one. It's tough cause you want to talk about it and everything. And when you're in the thick of a job it's easy to forget all the stuff going on in the world. On a multi-cam job this past week, the 1st AC passed out a set of Eartec wireless comms to the camera crew. I’ve used wired comms before many times and of course radios, but it was my first time using these. It was great and made communication super easy when we were all spread out. I wonder if there’s a way to use these for this purpose. Link to comment Share on other sites More sharing options...
Premium Member Justin Hayward Posted October 24, 2020 Author Premium Member Share Posted October 24, 2020 It's a good idea. I'll pass it on. Thanks. I have a commercial shooting in a couple weeks and this company I work with has a remote shooting system set up using Cisco Webex combined with a "secure" HD video stream so the client and most of the agency won't be there, but can still see what we're doing in real time. I don't know how efficient it is, but we'll see. Link to comment Share on other sites More sharing options...
Premium Member Justin Hayward Posted October 24, 2020 Author Premium Member Share Posted October 24, 2020 I'm guessing things like I just said above will sound archaic in like five years... or maybe it does now for all I know. I still don't use twitter ? Link to comment Share on other sites More sharing options...
Premium Member Satsuki Murashige Posted October 25, 2020 Premium Member Share Posted October 25, 2020 4 hours ago, Justin Hayward said: I'm guessing things like I just said above will sound archaic in like five years... or maybe it does now for all I know. I still don't use twitter ? Nah, that’s what most tech companies are using out here too. 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now