Jump to content

Noisy / Squeaky Reglomatic Zoom Control on Beaulieu 4008 ZM II with ANGENIEUX 1.9/8-64mm


Dave Stroup

Recommended Posts

I recently picked up a Beaulieu 4008 ZM II with the ANGENIEUX 1.9/8-64mm lens.  

When zooming out to a wide angle a squealing sound / squeaky like noise occurs.  This noise only occurs during the second half of the zoom range (from approximately 30mm to 8mm).  If I let the camera sit by the window in the sunshine for a bit (warm it up) this noise goes away and the zoom is quiet.  I assume this must be a lubrication issue(?).

Does someone know how I might try to lubricate the Reglomatic Zoom Control on this camera?  I’m tempted to hit it with some DeoxIT, but I’m not sure if that’s a good idea and I don’t want to make things worse.

Any advice would be appreciated.  Thanks!

Edited by Dave Stroup
Link to comment
Share on other sites

This "noise" is depending on that booth motor and lens has dried out. It will not help with some spray or similar. To cure it, lens and the reglomatic unit has to be dismantled old dried oil/grease has to be removed and re-oiled. As lens has to be stripped it will need a collimation to work properly again.

Link to comment
Share on other sites

On 3/18/2021 at 8:54 AM, Dave Stroup said:

Thank you for your thoughtful reply Bjorn!

Now sell your car when you want the work done ? 
Possibly best to ship to Bernie at super16inc. He is a certified lens repair specialist. Angénieux and Schneider or what more.

 

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...