Floris Vanhoof Posted August 2, 2021 Share Posted August 2, 2021 I filmed on 3 different stocks, and spliced them together. (2 work prints and one reversal stock) In projection, when a new stock begins, it is out of focus and I have to refocus. Is it because of the slight thickness in film? Because of the precise cut of the splices? Or because of the tape holding the stocks together? Is this normal and is there something I can do about this? After summer, I will have a negative cut and proper prints made, guess that will solve it anyway. But for now, I learn a lot from splicing the work prints and showing them as a work in progress that can evolve every screening. Link to comment Share on other sites More sharing options...
Premium Member David Mullen ASC Posted August 3, 2021 Premium Member Share Posted August 3, 2021 It's because prints are made from negatives emulsion facing emulsion, so while the emulsion on the camera negative and the reversal stock are on the same side (the side facing the incoming light from the lens), the print off of that negative has the emulsion on the opposite side. So when you splice a camera reversal original to a print, the focus will have to shift to compensate for the base on one of the two. Link to comment Share on other sites More sharing options...
Floris Vanhoof Posted August 3, 2021 Author Share Posted August 3, 2021 Thanks! Link to comment Share on other sites More sharing options...
Doug Palmer Posted August 3, 2021 Share Posted August 3, 2021 It might help a little if you stop down the projection lens with say a small black circular 'washer' on the front. Dimmer picture but sharper ? Link to comment Share on other sites More sharing options...
Premium Member David Mullen ASC Posted August 3, 2021 Premium Member Share Posted August 3, 2021 If you can live with the mirror image, you can flip one of the two stocks so the emulsions are on the same side, assuming that the sprocket holes are on the correct side for the projector (i.e. you could only flip the strip if it has perfs on both sides.) Link to comment Share on other sites More sharing options...
Floris Vanhoof Posted August 3, 2021 Author Share Posted August 3, 2021 Thanks for the tips David and Doug. Someone wil need to focus during the screening then, as only one side has sprockets and I rather not go dimmer. After years of reversal, I'm only started filming on negative stock this year. Happy it's not my splices that make it unsharp. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now