Jump to content

SR vs slightly worn SR3


Jon O'Brien

Recommended Posts

If you could choose between a slightly worn SR3 that has seen much use, or an immaculate German-modified SR which has hardly ever been used, and assuming both have been recently checked and both run fine, and are up-to-date with battery supply etc, which would you prefer? Is the SR3 significantly quieter? I'm guessing, if the SR3 is a bit old, then not necessarily.

Link to comment
Share on other sites

  • Premium Member

I think SR3s are much better cameras all round.

If the SR has been converted, make sure it was a proper conversion with modified mirror/shutter, recentred mount and optics, modified mags and an actual S16 gate, some early modifications were a bit dodgy. 

The interiors of SR mags have often deteriorated with age, so that the rubberised paint has become sticky and can interfere with the film, so check that. 

I think even a well-used SR3 would be quieter. A lot of use is ok as long as it had a bit of maintenance and wasn’t subjected to salt water or lots of fine sand etc, or stored in a damp, musty basement.

 

  • Upvote 1
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...