Jump to content

Issue with Arri IVS HD On Arricam ST


Carlo Molinari

Recommended Posts

Hi everybody, 

I’m having few issues with the Arri IVS HD on the Arricam ST. 
When we switch on the camera we always see this glitch. 
 

Any idea about to fix it ? 
p.s. we have already send it back to the rental house but we still have it. 
 

0FAB1588-F949-4635-B403-AB739E969CF3.jpeg

Link to comment
Share on other sites

  • Premium Member

Not really the sort of problem that can be diagnosed over the internet, the rental house needs to sort it out.

But obvious things to check are the cables and monitor, so if you can swap those over it will isolate the problem. If it still happens then the issue is the IVS itself and an experienced electrical tech needs to look at it. 

Link to comment
Share on other sites

hi roni, you are not the first to give me this tip.

Yesterday during the second day of the set since the IVS returned from the rental house, we found that that problem occurs in the first hours of work of the IVS, once it goes to temperature it no longer gives this problem.

Consider that we 're are shooting at night so it is quite cool (21°/15°)

It seems that noise in the upper right box appears when the exposure is too low.

We have disabled all the automatic controls, so we are working in Manual with the gain.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...