-
Posts
1,906 -
Joined
-
Last visited
Everything posted by JD Hartman
-
Is this a pole operated studio fixture? Probably not breaking news, but the Harry Box book lists the globe#, scrim size and other most fixtures, old and modern. If your measurements are correct, Matthews could probably make you a set.
-
13.25" , are you certain? 13 and 13-1/2 are typical sizes. Which model Strand or QuartzColor? Scrims should be the same diameter as the barndoors.
-
Every setup is a reflection of yourself. If you have to buy "Hardware" or grip equipment to make the shot, it's not as if you will never use the items again. A rig that's not sturdy, maybe needs frequent readjustmet or looks unsafe, isn't going to save time or get you more work.
-
If it were my space...I wouldn't allow a clamp on my 100 year old brick. Removing the black plates and using the existing anchors in the brick for the grip hardware would be my choice.
-
The eyebolts are not in the same plane. Doubtful that you could slide a rod or pipe trough any two and not hit the brick of the column. Could you span the width of the "industrial" gallery with speedrail wall spreaders? Or Remove the plate(s) with eyebolt and bolt a junior wall plate in its place. Two Big Bens and a section of speedrail would give you a flexible setup.
-
Clean and Disinfect your touch screens COVID-19
JD Hartman replied to Cindy Garland's topic in Cinematography News
I've seen many touch screen monitors in retail stores ruined by Lysol spray and alcohol wipes. Nice of Cindy to join to hawk her products. -
How do you store Grip & Rigging Equipment?
JD Hartman replied to Sam Bignell's topic in Grip & Rigging
Make them from wood. Like the Apple Boxes. Finger jointed corners are easy to mass produce with a simple jig. -
I've put gels on the barndoors of 2k as well, no problem. Gelled open frames are really the way to go. Saves time and gels.
-
Suspend the show from three points and rotate from above with the camera fixed. Shadow will be genuine. Do wire remove in post.
-
Who makes a 1/4 -20 one inch riser?
JD Hartman replied to Daniel D. Teoli Jr.'s topic in Camera Operating & Gear
You want a one inch thick riser, what diameter? 1/4-20 female on one side, 1/4-20 stud on the other, how long? Aluminum Okay? -
Platform attached to car frame? Scenes were shot when vehicles, even smallish cars had separate bodies and steel frames. Dangerous, yes, but shot when the safety Nancys weren't as numerous.
-
Will motion picture film survive the current situation?
JD Hartman replied to Malcolm Ian Vu's topic in General Discussion
I agree with you first paragraph somewhat. However, people who develop cheap habits continue with that habit even when no longer constrained personal finances by a shoestring budget. I can save you $$$$ on film stock, we can use that money elsewhere. I'm sure the people with business degrees have considered ideas like you before and decided it's not in Kodak's best interest. Paragraph three, how do you know how much stock they manufacture and destroy on a given month? -
Will motion picture film survive the current situation?
JD Hartman replied to Malcolm Ian Vu's topic in General Discussion
No, not selling old film stock preserves the value of the brand, real or perceived. If every one could buy 6 month old stock at a discount there would be much less market for chemically fresh. Bad marketing. The cost to manufacture doesn't diminish, along with the films sensitivity does it? -
With everything suspended indefinitely, how it efffecting the camera and grip rental houses in your area. There is also the trickle down effect, no income for manufacturers and suppliers like Rose Brand, Advantage Gripwear, Matthews, American, MSE, erc. 4Wall gobbled up a lot of other companies in previous years and moved the NJ location to n even bigger place. Will the giants like Cinelease or 4Wall survive or will the little shops with lean operating costs and few employees make it through this?
-
How long do you think we're gonna be unemployed?
JD Hartman replied to Frank Hegyi's topic in General Discussion
Really? The ones I see live in Penn Station, subway tunnels, train cars, encampments under bridges, etc., dirty conditions, in close quarters. Fresh air will do as much for the Corona virus as it did for TB in the 1900's. -
Moving shot, process trailer or tow rig?
-
How long do you think we're gonna be unemployed?
JD Hartman replied to Frank Hegyi's topic in General Discussion
I'm surprised there hasn't been a major die-off of the SF, LA and NYC homeless population. And before any yells conspiracy theory or cover-up or whatever, yes I would have heard about it. -
Wanted Barn doors for strand 2.5 hmi
JD Hartman replied to Niall Flynn's topic in Lighting for Film & Video
Look in the tables at the back of the Harry Box book. That will tell you what other brand lights used the same size barn door and accessories. Call the bigger grip rental houses, they may have some old heads sitting around that they scavenge for parts. -
How long do you think we're gonna be unemployed?
JD Hartman replied to Frank Hegyi's topic in General Discussion
Large scale productions with A list cast, do you think those actors are going to rush back to the set if the ban is lifted in June. They have the money to isolate themselves and be comfortable, why would they risk it? -
How long do you think we're gonna be unemployed?
JD Hartman replied to Frank Hegyi's topic in General Discussion
The homeless.....you won't vaccinate them, certainly not first, some never as they will refuse medical treatment. -
How long do you think we're gonna be unemployed?
JD Hartman replied to Frank Hegyi's topic in General Discussion
Not just in LA, the homeless in SanFran and New York will unfortunately be an indicator of the virus worsening. I don't believe the stats China is reporting, very few new infection? April and certainly May will be very bad months in NYC. Workwise, until the travel ban is listed (in areas with said), there won't be any non-essential work. Time to find a different way to use your skills. Just acquired a "travel certificate" for NJ, hope to get one for NYC this week. -
honda eu7000is adaptation?...
JD Hartman replied to john spader's topic in Lighting for Film & Video
You have to consider voltage drop in the cable (bamded, bates or stinger) at a given length and current draw. Beyond an acceptable amount, you will have trouble getting an HMI to strike or re-strike. With voltage drop, color temp shift sin the warm direction. Too much to cover here. I'd run no more than 100' of Bates, at 45A our voltage drop would be a little over 3%, still acceptable. -
honda eu7000is adaptation?...
JD Hartman replied to john spader's topic in Lighting for Film & Video
Bates cable made with portable cordage weighs a ton. You're really better off buying a premade 50' 60A bates. If you insist on making it, use type SC (fine strand, Stage Cable) wire instead. You'll have to find an electrical supply that stocks it.