Jump to content

Alain LeTourneau

Basic Member
  • Posts

    392
  • Joined

  • Last visited

Everything posted by Alain LeTourneau

  1. Nathan, Another suggestion.... Try contacting Rangertone in NJ and see if they have a Hokushin portable intermittant, or even an SC-210 for sale. Hopefully something that has been recently serviced. These are slot loaders that if well-maintained can he good registration. -Alain
  2. Thanks for the feedback... I think I'll get the larger one - 36x27x14. If I want the pup tent, perhaps I'll spurge and get it down the road. Or even better, find one used. Now I'm left to ask how the 36x27x14 tent does with the XTR 800' mag? I am assuming there are no troubles if it is said to work with 35mm 1000' loads (35BL?). -Alain
  3. Oops. Ment to say "these are NOT new motors"...but conversions of old motors. Sorry to see the TCS motors, and speed checkers, and milliframe controllers, etc go the way of Media Logic. I had a TXM-26b for my Bolex SBM. The camera's new owner loves it. I wish it were financially feasible for someone to manufacture a motor similar to Aaton's Alcan. Brilliant little device, and it would help stimulate the sales and use of the NPR, which at this point is the best, low-cost option for s16 sync shooting. Most would agree that the biggest drawback of the NPR are its bulky motor and craddle, and the ACL is not a better solution in my opinion. But I'm going OT here... -Alain
  4. You would need an intermittent in order to get the best registration. ICECO sells some portable intermittent projectors but you're probably looking at $2500-5000 and up. Fumeo, Prevost, and Philips-Norelco made portable intermittent machines. Most portable, claw movement projectors (Kodak Pageant, Eiki, Elmo) introduce a slight vertical bounce. The claw timing has the be just right, and even then there is still some movement. Pageants have decent registration, but still show play. The 1950s RCA 400 has very good vertical registration, but if the springs are worn on the lateral pressure guides, then you get horizontal weaving. In pedestals the old, French-made Hortson G has very good registration if set up properly. Both the Pacific Film Archive and Harvard Film Archive have these machines installed in their booths. The picture is glued to the screen. But you'd want to have a few machines for parts, and it's loud like a cement mixer. I see these machines selling all the time for several hundred bucks, but you need to find a good tech for service (which shouldn't be too difficult in NYC), and be willing to deal with the space the machine takes up. It's not huge, but it's also not a portable. I would suggest posting your question to... Film-Tech, eFilmcenter, and 16mmfilmtalk.com. There you will get a whole host of good recommendations, or at least enough mixed responses to make your own educated selection. Also, try AMIA's listserv as many archives have their own exhibition programs and staff who are very knowledgeable about projection. BTW, there's a guy on Film-Tech named Steve Guttag (in Maryland I think) that may be able to sell you something. Most theater supply and service centers have old 16mm projectors laying around from when they yanked a nice 16mm projector from a booth during a modern digital installation. -Alain
  5. Thanks for your feedback. My interest in the smaller tent has to do with loading in situations where I have a limited amount of space. 26x19 is a big enough foot print for the mag, I was just curious if I'd need that extra two inches of dome height that the standard tent provides? I thought perhaps the pup tent would just barely allow the mag door to clear? I never load 35mm (at least, not anymore), so I'm not too concerned about that, but I may at some point be loading an 800' 16mm mag. Maybe I'll ju$t get both. -Alain
  6. Andrew at AZ Spectrum does a nice conversion of the Bolex MST motor. Expensive, but very nice considering what he does. Also does Eclair NPR, ACL, etc. Granted these are new units like the TCS motors, but conversions of old motors (MST, Perfectone, etc). -Alain
  7. I'd like to move from my change bag to a tent. I thought to get the smaller size tent - 26x19x12 - but wanted to see if anyone thought this tent was too small for 16mm mags? When I marked the dimension out on a table it seemed large enough, but maybe the - 36x27x14 - size allows the process to feel less "cramped". At $200 a pop I didn't want to waste money making a bad choice. I've bought change bags that were just a little too small, so I wanted to avoid that... but I thought the dome might allow a smaller size than what feels good with a change bag. -Alain
  8. Send me your email - letourneau(dot)alain(at)gmail(dot)com. -Alain
  9. Revised package and price - $2100 + shipping !!! ===== FOR SALE - Eclair NPR package NPR #1154 CA-1 and C mount turret Angenieux finder #170 Aaton Alcan 24/25fps crystal motor #1051 Overhauled in August 2004 by Optical-Electro House (will provide copy of invoice). Additional items- 2x magazines - #BA52, #BA44 2x lightweight 12V on-board NiCD batteries and charger (new) 12V 4Ah battery pack (needs recell) NP-1 battery adapter 2x battery cables Spare claw movement Owmer's manual Service manual (en francais)
  10. I looked through the archive and could find no comparison of these lenses, so forgive me if it's there and I simply missed it. Does anyone have experience with both the Angenieux 11.5-138 and Canon's version of this lens? I'm curious not only about sharpness and contrast, but edge performance, as well as performance in the long end above 50mm, and distortion/flare issues. Appreciate any help as I found several good deals on each of these lenses and looking to make a decision. -Alain
  11. FOR SALE For capturing a wider angle of view while maintaining full zoom capabilities. The Century Precision Optics DS-65CV-SB 0.65x Wide Angle Converter Lens attaches to the front of your zoom lens for 35% more coverage when set to wide-angle, telephoto, or anywhere in between. The Digital Series is a family of high quality lenses available in a bayonet mount for use on DV camcorders, like the Sony DSR-PD150, DSR-PD170, DCR-VX2000, DCR-VX2100 & DSR-250. Like new condition with its original box. $275 + shipping -Alain letourneau(dot)alain(at)gmail(dot)com OR call 503-231-6548.
  12. FOR SALE AKG c568eb short shotgun, like new in original box with clip and foam windscreen. The microphone yields a hypercardioid polar pattern below 500Hz. Above 500Hz, the microphone increases directivity, eliminating signal at the off-axis sections of the capsule. The condenser element requires 9V to 52V phantom power and features a wide frequency response of 20Hz to 20kHz. A low-cut filter switch eliminates hum and noise at 120Hz. $400 + shipping -Alain letourneau(dot)alain(at)gmail(dot)com OR call 503-231-6548
  13. Revised price - $500 + shipping -Alain ============ SHURE FP-33 three channel mixer, like new with Porta Brace bag and manual. $750 + shipping
  14. Revised package and price - $2850 + shipping !!! ===== FOR SALE - Eclair NPR package NPR #1154 CA-1 and C mount turret Angenieux finder #170 Aaton Alcan 24/25fps crystal motor #1051 Overhauled in August 2004 by Optical-Electro House (will provide copy of invoice). NPR #1555 Arri B and C mount turret Kinoptik finder #55144 Aaton Alcan 24/25fps crystal motor #C5J11 Needs service, price quote from Optical-Electro House was around $900 for a complete strip-down, clean, lube, and align to factory spec. Additional items- 3x magazines - #BA52, #BA44, #ED254 Angenieux 12-120/T2.5 B mount Angenieux 12-120/T2.5 CA-1 mount 2x lightweight 12V on-board NiCD batteries and charger (new) 12V 4Ah battery pack (needs recell) NP-1 battery adapter 2x battery cables Spare claw movement Owmer's manual Service manual (en francais)
  15. How is this ground glass marked? Does it have 1.33 and 1.66 markings? -Alain
×
×
  • Create New...