Jump to content

Charles Papert

Basic Member
  • Posts

    44
  • Joined

  • Last visited

About Charles Papert

  • Birthday 02/16/1914

Profile Information

  • Occupation
    Cinematographer
  • Location
    Los Angeles

Contact Methods

  • Website URL
    http://charlespapert.com

Recent Profile Visitors

4,726 profile views
  1. Wayyy late to this conversation but in case someone searches it: I rent a variety of tube cameras including JVC KY1900’s as well as consumer single tube cameras, pre-configured with analog to digital conversion and uprez to HD-SDI , onboard file based recording etc. Please see zgrents.com for more info!
  2. I can't think of any. specific tip on that regard other than just keep practicing! If you have been following fish and airplanes, they rarely stop on a dime, so you are getting less practice in stopping and starting smoothly. Humans that you can direct help with this! Maybe you can assemble a reel of footage from long uninterrupted takes with people moving in the frame and play back on a large screen TV and follow along? At a certain point, you just have to get out there on a set and use them with real stakes, that's where the rest of the learning takes place. Trial by fire! Unfortunately the hardest thing to manage with the wheels is backpanning, which is tough to replicate at home. It's not as common to encounter any more since a lot of remote head work is stabilized now, which helps a lot, but nothing really prepares you for having the chassis rotate and you have to counter-pan to keep the lens pointed straight ahead. The worst scenario is a small crane or jib which describes a short arc when swung around, so the backpanning is quite fierce. Similarly a dolly in steering mode (vs crab). Again this is becoming less common but it could still come up! I guess a way to replicate this would be to mount your head on a hi hat on top of a turntable or lazy susan and having someone rotate it, come to a stop, reverse direction etc. while you do your practicing following subjects.
  3. Which accessories? Reduction wheels? not really needed. I think it safe to say that the skill is transferable, although I imagine it would be harder for someone who has only learned it on the remote head side to use a geared head since there is a difference in feel between the gears (more resistance in 3rd vs 1st), plus the if one is used to dialing in a precise ratio as you can do with remote heads, it might be hard to adjust to only 3 gears, especially with a very fast or very slow move.
  4. Whatever works for you is all that really counts! Might as well mention one other fun trick which helps with landing perfect headroom when an actor stands up quickly out of a chair. Start with framing them in the standing position. Lock the tilt on the head and slip into neutral. Rotate the wheel so that the pin is in the 12 o'clock upright position. Go back into gear and unlock the head. Now have them sit, and count how many rotations of the wheels it takes to land your seated frame. So now when they stand, it takes all the guesswork out of it, you count the rotations in your head and stop the wheel with the pin at 12, and voila, perfect headroom every time. It doesn't have to be at 12, it could be any orientation you preferred as long as you can stop it there repeatedly at high speed.
  5. The hard part about panning in neutral like that is coming to a controlled stop without kickback since there is no resistance. Also if you have to continue on in the shot after the pan with subtle moves, you'd have to shift it into gear on the fly, which is doable but a little challenging. So most of the time I'd have it in 3rd gear, spin up the pan wheel, continue to drive the pan by pushing the tilt wheel, then use the heel of my hand on the pan wheel to gently feather it into the stop. And then you can continue on operating. I did do it in neutral sometimes but never used a pan bar.
  6. I came up in the Boston market and in my mid 20's decided it was time to learn how to operate the mystical geared head. I borrowed a Mini-Worrall from Boston Camera over the winter months when production was quiet and did the laser pointer exercises every day. The next spring I was doing Steadicam on a commercial that was also using a Power Pod on a Giraffe crane and it turned out that no-one on set had experience on the wheels (how did that happen?!) so I bravely jumped in and navigated my first backpan adventure, a full arm swing pointed straight ahead, which was lightly terrifying! Not long after that I shot my first feature ('95 or so) and requested the shiny Arrihead 2 for that and got some good hours in, seen below. A year later I landed a union operating gig on a network TV series in New Orleans replacing another operator, and my first three shots were Steadicam, handheld and dolly with the geared head. It was almost like an audition and I was very glad to have bothered to learn the skill. Shortly thereafter I moved to LA and was working consistently as an operator and every set had a Panahead or Arrihead. It became my favorite way to work, to the point where I got rusty on the fluid head in comparison! On "Scrubs" we did a lot of whip pans and it was fun learning how to throw the wheels. Years later I dayplayed on a series and used the Arrihead for that purpose and half of village came trotting in to watch the spectacle, which seemed weird until the AC told me that none of the other operators did it that way so this was a point of intrigue. When I moved up to DP, I'd put the Arrihead on the rental list but when the inevitable cuts were made it was one of the first things to go. A few years ago on a bigger show I offered it to the operators but they weren't interested. Even when I told them that if you were going to fall asleep in the eyepiece, it was easier to do so on the wheels, less chance of a bump in the shot! Ah well. Last thing I'll say is that I have seen a disturbing trend with remote head wheel interfaces gaining new popularity for controlling gimbals, where newer DP's and operators start re-assigning the wheels to suit what "makes sense" to them, not only direction but sometimes swapping pan and tilt. This of course means they will be quite discombobulated if they ever encountered a geared head, which feels like a real waste.
  7. Mixed kit consisting of (2) Arrilite 600 open face and (2) Arri 300's (images 3, 4, 5 below). Perfect for today's more sensitive cameras. The open face units are great for bouncing or pushing through diffusion, as they give you more output for the power draw and wider spread than fresnels. And the 300's are great as accent lights, backlights or for slashes. This kit has the four lights with globes and barn doors, four stands, 5 ea. single and double scrims, plus one 300s and two 500w spare globes. Comes in Arri thermodyne case. Very little use and very clean. Asking $800 Lights are located in Los Angeles so local pickup preferred, will consider shipping (domestic only).
  8. Privately owned Alura 18-80 T2.6 lens, imperial markings. Checked out by lens service at major rental house, clean bill of health. Glass elements clean. Usual wear marks on body. Innerspace case. Included are 15 and 19mm lens supports and rods. $18250 obo.
  9. Very good condition, no optical or mechanical issues, just typical use marks on the mount and chassis. Privately owned and operated. Comes with Innerspace case, 15 and 19mm rods, 15 and 19mm lens support. $18,250.
  10. Waking up a topic 10 years later....wakey wakey. Any other sources for renting a front surface mirror in LA? Need a 4'x4' for this Friday.
  11. On the IRND issue, I have been using the Mitomo ND filters for the past few years which deliver very minimal to imperceptible color shift compared to the Tiffens or Schneiders etc. That used to be a big struggle and haven't worried about it since. They are more delicate and require the AC's to be much more vigilant.
  12. I own an A7S, which I bought to replace my 5DMKII as a stills and motion camera. I've shot 95% of my last four years on Alexa. The A7S has only been used on set to do capture stills and couple of very simple and specialized video clips (recreating cel phone video for a burn-in for instance). The reason I haven't turned the A7S into a shooting machine the way I did with the Canons five years ago was because I just don't have the time and inclination to research all the parts: what is the best cage, breakout boxes, lens mounts, external monitors, monitor arms, blah blah blah. It's a lot of effort. Totally understandable if this is all one can afford in which case it may be a great solution (although I think it quickly starts to add up to resemble the cheaper camera bodies that are built to shoot motion). Even once rigged properly, DSLR's are notorious for slow to navigate controls and menu systems. The side of the Alexa (and the lookaround area of the onscreen image) tell you at a glance all the most essentially settings: ISO, color temp, green/magenta shift, shutter angle, run time etc. and any of the above are quickly changed. All of that has to do with speed and comfort on fast-moving sets where every minute counts. But image quality is what lasts and it is true that the gap between the high end and entry level cameras continues to close. At the point at which a "renegade" camera manufacturer creates a product that can go head to head with the Alexa in the ways I consider important and at a fraction of the cost, sure, I'll be interested.
  13. Hey Guy! Howaya. Good examples and stills, however, keeping in the phraseology of day for night, you said downstage for upstage...!
  14. My experience is that while the Alexa image can be jostled around in post to emulate classic film looks, it's much more elusive to duplicate the look of analog and particular tube-camera video. As a result, I've collected a few 80's era cameras and we've used these quite a bit on the series I shoot (Key & Peele, on Comedy Central) when we are looking to emulate that particular look. For this one we used a Magnavox home video camera circa 85 (1/2 Saticon tube) that conveniently had a breakout cable with power and composite video so I am able to connect it to an external solid state recorder (I have a couple of old Nnovia DV recorders similar to the Firestore that I fortunately didn't sell before they became obsolete). From previous work the director had sample clips of VHS artifacts like the rainbow shimmy you'd get an edit point and he layed those in here and there. The footage was upscaled in Smoke and cut in with the rest of our Alexa footage. For these we used JVC-KY1900's (three 2/3 Saticon tubes) again fed out to solid state recorders. http://www.comedycentral.com/video-clips/ll9zy0/key-and-peele-funky-nonsense https://www.youtube.com/watch?v=Qto_Sx4Id6k https://www.youtube.com/watch?v=7N8xwXUk_bY While the look right out of the box is fantastic, it was only appropriate to complement it with the most appropriate (aka worst) lighting and camera moves we could muster, which was tremendous fun. If anyone is interested, I have two each of the Magnavox and JVC cameras available for rental.
  15. Hi all: For an upcoming piece that duplicates the look of 70's television, I need two and preferably three matched broadcast tube cameras, 70's to early 80's era. Having a devil of a time finding them available for rent. History for Hire has variations that are props with modern cameras inside, so it's not that. We would record out to outboard recorders. Any suggestions?!
×
×
  • Create New...