Jump to content

Thomas Beetz

Basic Member
  • Posts

    10
  • Joined

  • Last visited

Everything posted by Thomas Beetz

  1. For sale is a mattebox including railsystem (Arri standard) & camera support (as shown in the photos). This system was custom-made by Les Bosher (camera engineer from the UK) for my Russion Konvas 1M 35mm film camera and I only used it for two film project 6 years ago. As I have looked after it well and not used it very often, it is in good condition. The system is made from High Quality Light Alloy for Superior Strength & Durability. Holder for 100 x 100mm Glass Filters with 1 off Fixed & 1off Rotating Stage. Supplied with Filter Trays. Here is the Ebay link. Worldwide shipping
  2. I am selling my Sekonic Dualmaster model L- 558 Cine lightmeter for DOPs. The lightmeter comes with the original package, the manual, the quick manual and the case. It is in very good condition and fully functional, because it wasn't used very often and well looked after. Here is the link: http://www.ebay.de/itm/261016419210?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1558.l2649
  3. By the way, the lenses can be PL adapted by purchasig an Arriflex - Pl adapter (e.g. www.lesbosher.co.uk) and then be used on the Red One, Arri Alexa or any digital / analogue camera that has a PL mount or 35mm adapter (e.g. Letus, P&S adapter...). The images are stunning!
  4. I am selling my beautiful set of Cooke Speed Panchro Lenses Ser. II/III. It consists of 5 lenses all in good working condition: 8mm Cooke Speed Panchro Ser III @ f. 2 25mm Cooke Speed Panchro Ser III @ f. 2 35mm Cooke Speed Panchro Ser II @ f. 2 50mm Cooke Speed Panchro Ser II @ f. 2 75mm Cooke Speed Panchro Ser II @ f. 2 All lenses come with front and rear lens cap and focus gears for a follow focus. For more information visit the auction: http://www.ebay.de/itm/260858439554?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1558.l2649 Many thanks If you have any questions please contact me through Ebay.
  5. I am selling my Konvas 2M with the following features: * Rotavsion 5000 speed crystal locked electronic motor - 0.1 to 50fps * PL Mount * Custom viewfinder mounted videotap by Rafcam. * 2 x 400ft mags * 4 x 200ft mags * Arrliflex Standard to PL mount adapter. * 50mm ARRI lens. * 2 x Powerpack * 2 additional mirrors * Additional 'Academy' gate. * Additional magazine for spare parts. Here is the link on Ebay: http://cgi.ebay.co.uk/ws/eBayISAPI.dll?Vie...ME:B:EF:GB:1123 Many thanks
  6. Thanks for your replies. You have been very helpful. I did not realize that you have to calibrate the entire camera mechanism. It s definitely not worth it. I ll come up with different ways to achieve the desired effects.
  7. Thanks for your replies. You have been very helpful. I did not realize that you have to calibrate the entire camera mechanism. It s definitely not worth it. I ll come up with different ways to achieve the desired effects.
  8. Hi, I was wondering whether anyone has used the Konvas 2m with different shutter angles. I have read about shutters made from cds, done by a film technician. It sounds very interesting, as it seems to reduce noise. Has anyone heard about this? I want to make different shutters in various angles, i.e. 45, 90, 180, 280, 320 degrees to use them creatively on an upcoming short film. Is it difficult to change the shutter on the Konvas or can it be done relatively quickly? Any input or shared experience in this matter would be much appreciated. Regards Thomas
  9. Thanks for the link. I will check it out.
  10. Hi there, I have a Konvas 2M with a new christal sync motor. I was wondering whether anyone has converted their Konvas to 2 perf and can recommend someone to do the conversion? How much does it cost and do you think it is a worthwhile undertaking? Thank you very much for your advice. Thomas Beetz
×
×
  • Create New...