Jump to content

Charles Pickel

Site Sponsor
  • Posts

    102
  • Joined

  • Last visited

Everything posted by Charles Pickel

  1. Je suis si desole... <aaton.com>
  2. Selling for a client: MK-III type Zeiss high speed 35mm T1.3/PL for 35mm & Super35 format. Focus scale in FEET. -Recently lubricated & collimated. -PRISTINE optical surfaces (a few dust particles visible inside) -Barrel shows average wear. Rear of barrel has worn paint, brass visible in places. Pretty typical for this type of lens. Image in projection is excellent. ASKING: USD$ 16,000.00 + SHIPPING & INSURANCE Charles Pickel /Serious Gear Co /Seattle USA email: cp@seriousgear.com FB: https://www.facebook.com/SeriousGearCo
  3. PRICE REDUCTION TO USD$ 900.00 Aaton adapter (set screw type): $ 95.00
  4. Offering for sale in very good condition, a classic Angenieux retrofocus super-wide lens for 16mm: 5.9mm f1.8/T2 in Arri standard mount. We have adapters of various types available at additional cost. The lens has clean glass for its age. Has some barely visible micro-scuffs on front coating. Will not affect images. Rear element is pristine. Factory metal front cap is included, after-market rear cap (fits tight, won't fall off). This is a RETROFOCUS lens, and so has no focus control ring. It is preset to about 6' ft./2M focus distance. Depth of field will carry other distances depending on iris diaphragm setting. This is a standard 16mm lens but is usable for Super 16, if you can live with some vignetting at the corners. First US$ 1000.00 takes it (or best offer). + shipping per agreement with buyer. Thanks ! -Charles (cp@seriousgear.com)
  5. Now listed on eBay:https://www.ebay.com/itm/304974761620#shpCntId
  6. Handgrip sold, MAGAZINE AVAILABLE, new picture posted of XTR-Prod fiber screen. Thanks for looking !
  7. Offered for sale: Excellent Aaton DX 400' film magazine for all XTR models (A;B or C magnetic ID). Magazine is newly serviced and will have old acoustic lining upgraded to mass-loaded vinyl sound deadening material that will never curl. Upgraded machined aluminum core lock hubs. Later type one-way sprocket drive (XTR-Plus/Prod era). Overhauled to factory specs & scratch-tested, incl. rubber nose guard: US$ 2250. 00 + shipping & insurance. FOB Seattle USA Other items we have on hand that may be of interest: - Fiber Optic viewing screen for XTR-Prod- Immaculate condition- (Camera gate/1.78:1 HDTV/1.85:1 corners) US$ 700.00 DM or email: cp@seriousgear.com
  8. Offering for sale, an extremely clean Aaton 400' DX mag. Compatible with all Aaton XTR type cameras + a few others (LTRX; XO). Mag was stripped to chassis & repainted by previous owner. I have now overhauled the mag, replaced drive belt, installed new clutch friction media + other parts. Adjusted to factory specs & scratch/noise tested. Includes rubber nose guard. There is also a spare ID magnet for designating it a "B" mag and the retention nut for using 100' daylight loads. These have become scarce, and you are unlikely to find a nicer mag. Asking US$ 2250.00 + shipping. Will ship internationally (buyer responsible for all duties & taxes). Thanks !
  9. Item ships today. Tracking to follow thru eBay.
  10. Yes: https://www.ebay.com/itm/304819257944 Just emailed you, thanks !
  11. Offering for sale: One Aaton 400' film magazine for LTR7 & LTR54 type cameras. Magazine has been serviced and fitted with a number of new parts (chiefly S16 rollers). Clutch tensions have been regulated, Sprocket assembly adjusted and magazine scratch tested on an LTR54 camera at 24fps. Runs clean & quiet. Looks like it was probably repainted at some time in the past. Take-up side door has partial hinges (lid comes off), T/U side door has full hinges. This is the factory original configuration. Factory rubber nose protector included. Serial # is M1150. Ready to use on your next project. Asking USD$ 750.00.
  12. Selling on behalf of a non-profit film foundation: Used Arriflex 35II-C camera kit in well-used condition. Camera has the rare Cinematography Electronics Xtal motor base and matching CE Intervalometer controller for doing time-lapse. The camera was not well-maintained, but the movement turns smoothly, CE motor runs strong at various speeds, LED's all light, mirror shutter is complete and bright, has 1:1.85 ground glass installed. Kit has 5 x 400' mags (IIB type, belt driven in near mint condition), 1 x 400' mag (II-C type, gear driven), and several 200' mags in mint cond. Not much in the way of lenses: Schneider 28mm of indeterminate quality (glass is clean) and an unusual Nikon 300mm f4.5 with a nice Arri bayonet conversion. There is a 12v lead-acid type dual block battery built into a plastic case. it has integral chargers built by Oppenheimer Cine, Seattle. Dead lead-acid units are easily and inexpensively replaceable. There is also an original II-C variable speed motor (no cable) and hi-hat bracket. IIB type matte box (3x3") and a small filter kit. The foundation wishes to liquidate this equipment at a fair price to benefit independent filmmakers, and recognizes this may be a camera in need of some TLC. The list at this point: USED Arriflex 35II-C camera body (50fps body), turret with one Arri Bayonet mount, 2 x standard mounts, 1:1.85 ground glass Arri variable speed motor with idler gear & screws (NO CABLE) Cinematography Electronics XTAL motor base (4-pin XLR cable incl.) Cinematography Electronics Intervalometer (Fischer 11-pin cable for Arri) Arri IIB matte box (takes 3x3 filters") Arri "Hi Hat" camera stand Tiffen filter kit: 3x3" 85, 85N3, 85N9 B& W filter kit : Yellow, green, red filters 5 x 400' magazines: IIB type 1x400' magazine: IIC type 2x 200' magazines Arri periscope finder Custom dual block battery w/chargers (cells are dead) Niikon 300mm f4.5 ARRI B mount lens Schneider 28mm ARRI standard mount lens Cases for most items More photos available on request PRICE: US$ 3500.00 >>>Reasonable offers considered. Motor alone is worth somewhere near this amount. Thank you ! email: cp@ seriousgear.com
  13. Make me an offer over US$ 350.00 and it's yours (mssg me thru Cinematography.com) Thanks ! https://www.ebay.com/itm/304631084248
  14. Sorry, no 6:1, but I have an HEC multi-coated Ang. 10-150mm in Arri stainless bayonet mount. Very late 1980's production, clean glass, smooth mechanism. Could possibly be remounted. Reasonably priced: US$ 800.00 + shipping. Aaton & Arri PL adapters available at additional cost.
  15. HI Girogio, we have a Kinoptik 9.8mm converted by Century Precision Optics with full cine geared focus, stainless steel PL mount and internal filter chamber. Asking US $ 6800.00 or best offer. Thank you ! -Charles email: cp@seriousgear.com
  16. http://I Ollie, I have a very nice Media Logic 5 digital speed control with 11-pin Fischer cable for Arriflex. These are neat little devices, more compact than the CE Precision Speed control and no camera modification necessary. Switchable decimal point for .001 fps increments. Will control your 16SR up to 72fps.. These have gotten tough to find. Yours for a mere USD$ 325.00 + shipping. email: cp@seriousgear.com
  17. I have some options for you vis-a-vis XTR kits & SR SlowMotion conversion. Will get in touch via DM
  18. For Sale: DoP's personal set of classic Zeiss T2.1 Standard primes. Very complete 9-lens set in excellent condition: 16, 24, 32, 40, 50, 85, 100, 135mm T2.1/PL + rare 180mm T3. Asking US$ 44K.
  19. Hi Steve, my own opinion is to avoid those cheap $25-50.00 aluminum adapters. I have yet to find an accurate one. Fotodiox makes a respectable adapter, but they vary in accuracy by up to +/- .03mm. This means you must shim the lens to the adapter in the case of high speed lenses. I quality control them using gage blocks & a precision height gage on a granite surface plate. I send back the ones that are more than .01mm out. Right now, I have a dead-on Les Bosher stainless B to PL quick-release adapter ($ 285.00 + shipping) and a QC'd Fotodiox unit that is also dead-nuts zero ($ 195.00). PL rear caps: $ 18.00. Let me know if these interest you. Thanks !
  20. Offering for sale: Aaton 400' DX mag for all XTR type cameras. Magnetic designations are A, B or C. Amazingly fresh original factory finish, no noticeable scratches or dents. This is an XTR-Plus era mag with one-way sprocket mechanism. Freshly overhauled by yours truly: clutch mechanisms serviced to factory specs, cracking spindle hubs replaced with custom machined/anodized aluminum parts (note close-up pic of our machined hubs, which mimic the ribbed surface of the originals). Stainless steel film guides. Scratch tested. Includes rubber nose guard. Asking USD $1850.00 They don't come any cleaner. DM me or email: info@seriousgear.com
×
×
  • Create New...