Volker Bendt

O course it's a time code magazine. Price dropped to 250 Euro

Sold, Thank you. Volker

Sold Thank you. Volker

Does not fit 400ft.mags

To demonstrate the vignetting in the very corners a photo copy of original frames, taken at 7mm. This is not visible in the projected or scanned area.

Fore sale is a rain cover Porta Brace model RS 9+X Obviously it's for large camcorders, but I can't tell, (I'm a film guy). Around 60cm long, openings for lens and mic, please look at the photos. Rarely used, best condition. Asked price 80 Euro incl. worldwide shipping. Located in Germany. Any question please email me. Thanks, Volker

Fore sale is a rain cover Porta Brace model RS A. It's perfect for an ACL with 200ft. magazine. Too small for ACL with 400ft., ARRI SR or Aaton. Should also be OK for small Camcorders. Rarely used, best condition. Asked price 80 Euro incl. worldwide shipping. Located in Germany. Any question please email me. Thanks, Volker

For sale: Two mags. 200ft. for ACL, one magazine barney, well protected in a customized Pelican case. Asked price 250 Euro plus shipping. Located in Germany, shipping worlwide. Any questions, please email me. Thanks, Volker

Thanks Gregg, I will email Carl, Volker

For sale is a barney / soft blimp for ACL. It will fit any ACLwith small or big motor. Easy to attache with velcro. Asked price 150 Euro, Located in Germany, free shipping worldwide. Thanks, Volker

Here are some more photos. Included is a clip on matte box with 2 filter trays 4x4. There is a chrosziel matte box sold separately, please have a look. Thanks, Volker

Here are some more photos of the set. Comes in a well padded bag. Lens is not included, but sold separately. Price reduced to 850 Euro. Please email me for any question. Thanks, Volker

Not yet, it's R16. Les Bosher does it for around 600GBP.

For more photos of the entire set please email me. Thanks, Volker

For sale: Film magazine for ARRI SR3 high speed. Well maintained, fully functional. Was left after having sold my SR3. Asked price 300 Euro Located in Germany, shipping worldwide Thanks, Volker

For sale: Canon Zoom lens T 2,1 / 7 - 56mm, in ARRI bayonet mount (changeable) comes with Chrosziel Zoom dampener, front and rear caps, zoom stick clip on matte box 4x4. Customized alu box. This lens was not designed for S-16, but it's usable without severe restrictions: At 7mm there is slight shadowing in the very corners only when you look full frame (12,25x7,5mm), not to be seen in the projected or scanned format (11,95 x 6,5mm). Fully covering S-16 from 8 - 56mm. Perfect for hand held work, wide enough, not too long, close focus less than 2 ft. All in all very good condition, clear lenses. Asced price 1800 Euro plus shipping, Located in Germany, shipping worldwide. Please ask for more photos per email. Thanks, Volker

For sale: ACL 2, R16, latest model, heavy duty motor 8-75 f/s, fully orientable Angenieux finder. 1 Cameflex and 1 Arri standard and bayonet mount lens adapter. On board battery, cable, top handle, release handle, 2 mags. 200ft. or 1x 200 and 1x 400ft. Everything you need, ready to shoot. Full CLA service in may 2016, new motor electronics. I would add some 100 and 200ft. daylight spools for spooling down from 400ft. It's an absolutely reliable camera and should work for years without any issues. Asked price 900 Euro plus shipping Located in Germany, shipping worldwide

Hi Jon, no worries with your Bolex S-16. In my experience all Switar RX c-mount pre set lenses will cover S-16. The only exception may be the older non pre set 1,6/10mm. Believe me, I have the 1,6/10mm, 1,1/26mm and 1,4/50mm pre set lenses on the turret of my RX4. The Switar 10mm can also be used with the "ASPHERON" super wide attachment, which makes it an incredible 5,5mm combi. The Vario Switar 1,9/16-100mm will cover S-16 through the entire zoom range from inf. to around 1,6m. The Schneider Cinegon 1,8/10mm is also fine. If you look at the full size film image (12,35x7,5mm), there may be a sign of shadowing in the very very corners. The projected area is 11,75x7,05mm, the scanned area for HDTV is 11,75x6,35mm and there is no vignetting at all. For private use I'm shooting reversal, lucky to have a S-16 projector, which makes a wonderful home theater and there are absolutely no issues with all these lenses. Have fun with your RX5 Volker

Hi Constantin. As for your original problem, I'm with Heikki. Using a release handle helps a lot. Yes, tightening the motor demands a skilled hand, not easy to describe. Too loose means also stress for the mini connector! Imho replacing the motor with the small one does not make sense, it's 3oo gr. difference, but the balance is the same. Your motor is the last version, the knob for manually moving the mirror is less protruding than with the former samples. The motor will automatically stop in viewing position, which is indicated by this knob, the little dot in clock 9 position. Good luck, Volker

Hi Jon, I can offer you a S-16 Bolex RX5 in perfect order, strong spring, comparatively silent for a Bolex. if you are interested, please email me. Located in Germany. Good luck, Volker

Hi Vitaly, I can offer you a standard Angenieux finder and a shutter, widened to S16. If interested, please send me an email, Volker

There is a Switar 10mm with defektive diaphragm lever, may be its ok for rehousing, eBay-Artikelnummer: 162176946837 Volker

Hi again, for the Distagon super speed 1,2/9,5mm there is an Aspheron pre lens which makes it a super wide 5,6mm. I have that one and it's sharp and free of distortion, but tricky with reflections. I can also use it with the Vario-Sonnar 2/11-110mm, makes it a fix 6mm, no zooming. Volker.

Hi Carl, the Switars are nice lenses, no doubt. I've got the 10/26and 50mm on the turret of my BOLEX and love them. But for your ACL you should also consider ZEISS super speeds in ARRI bayonet mount, ready to use. With a little bit of luck you might even get two of them, 1,2/9,5 plus 1,2/12 or 16 or 25mm at the price of one modified Switar. Good luck, Volker

FFD c-mount is 17,52mm. Any adapter solution will be too long for infinity focussing.