Timothy Kane

Lambda Head with RBQ and rolling case.

$9500

Located in North NJ - near Manhattan. Can also be picked up in Phila. 

Willing to ship - buyer pays shipping.

This is a transmitter and receiver that was designed to make the hard wired iris control from Preston into a wireless system. The unit for sale includes the (hard wired) iris control hand unit from Preston, the cradle that connects the iris control to the transmitter and battery, the receiver, and a Heden M26VE motor. Sale also includes (motor and power) cables, battery for the transmitter, and a battery charger. (additional blank iris disk included) This unit (receiver) is wired the same as the Preston and so will drive a Preston motor with the standard Preston cable. I used this system with a Preston 3 motor system. The focus and zoom were plugged into the standard MDR and the Iris was plugged into the small receiver. The design of the cradle allows the hand unit to sit upright without additional brackets. This unit can be used to drive any of the gears of the lens - so it could also be used as a remote focus device. ****Update**** Some people have asked if I would sell it without the motor. Yes - willing to sell without the motor. PM me if you are interested.

Sniper MK II For Sale on EBAY. Reserve Price is $3000 http://www.ebay.com/itm/331131228185?ru=http%3A%2F%2Fwww.ebay.com%2Fsch%2Fi.html%3F_sacat%3D0%26_from%3DR40%26_nkw%3D331131228185%26_rdc%3D1

I have moved my Sale of the Sniper MK II to Ebay.

http://www.ebay.com/itm/-/331126372633

Thank you to Tim and the Cinematography.com community.

Excellent point. Thank you. Los Angeles. West Hollywood on Tuesday.

Red Epic.

Tuesday is A music video. Thursday - Sunday is a portion of a narrative scripted pilot.

Looking for a 1st for a low/no budget shoot.

Next week Tuesday Oct. 15th, then Thurs. through Sun.

I am trying to get some money dedicated to the position, but It won't be much.

I am interested in buying a single motor for focus.

Preston, Heden, C-motion, etc.

Digital motor only.

Thanks

tk

Sniper MK II
Infrared Range finder made by Adam Ward.

Second generation infrared rangefinder for
Focus pullers. (Use in the same situations as the
Cinetape but for me is much more accurate.)

The Sniper includes two control cables (sensor to the readout) as well as two 3 pin rs power cables (arri style) and two panavision power cables (24volt style)

It includes a case, manual, and Noga arm.

I bought it directly from Adam Ward.

Sniper MK II
Infrared Range finder made by Adam Ward.

Second generation infrared rangefinder for
Focus pullers. (Use in the same situations as the
Cinetape but for me is much more accurate.)

The Sniper includes two control cables (sensor to the readout) as well as two 3 pin rs power cables (arri style) and two panavision power cables (24volt style)

It includes a case, manual, and Noga arm.

I bought it directly from Adam Ward.

$6000

Here is a link to a description.

http://www.rosco.com/spectrum/index.php/2011/01/litepad-kits-the-proper-kit-for-the-proper-use/

The one I am selling has the Gaffers Kit label on the outside but is packed like the

Here is a link to a description.

http://www.rosco.com/spectrum/index.php/2011/01/litepad-kits-the-proper-kit-for-the-proper-use/

The one I am selling has the Gaffers Kit label on the outside but is packed like the

This is a repost:

Sniper MK II

Infrared Range finder made by Adam Ward.

Second generation infrared rangefinder for

Focus pullers. (Use in the same situations as the

Cinetape but for me is much more accurate.)

The Sniper includes two control cables (sensor to the readout) as well as two 3 pin rs power cables (arri style) and two panavision power cables (24volt style)

It includes a case, manual, and Noga arm.

I bought it directly from Adam Ward.

$6500

Ward Sniper Mark II

Second generation infrared rangefinder for

Focus pullers. Use in the same situations as the

Cinetape but for me is much more accurate.

The Sniper includes two control cables (sensor to the readout) as well as two 3 pin rs power cables (arri style) and two panavision power cables (24volt style)

It includes a case, manual, and Noga arm.

I bought it directly from Adam Ward.

$6500

Litepad kit with thin light panels that are dimable and can run AC or DC. - Daylight Balanced

Similar to the kit listed at B&H

http://www.bhphotovideo.com/c/product/744917-REG/Rosco_290240AXGKIT_LitePad_Pro_Gaffer_s_Kit.html

I believe that it is an older model kit but seems to have all the same units.

$2000

I have a 400' 435 Magazine for sale.

Excellent condition.

$3550

I am selling my SNIPER Focus assist System. (range finder similar to Cinetape, but with Infrared technology)

This is a system designed by Adam Ward.

I have the MK II Unit.

I am selling my unit for $8500.

Tim

SNIPER range finder - created by Adam Ward.

Similar function to the Cinetape or Panatape

Except far greater accuracy.

$8500

Contact Tim

Hello

Does anyone have a beat on the software that is used to check that your paycheck is correct?

I believe that it was a John Bicaccio program - PAIDRITE - or something similar.

Thanks.

tk

We are now offering a camera assistant training course.

The next course starts May 5th.

Advice or comments are welcome.

www.camera-assistant-training.com

Hello,

I am posting this to alert the community that my equipment has been stolen.

Steadicam Ultra

SLED - #195219

ARM - #195217

VEST - #195213

Modulus 2000 - #2610

2-Bartech Focus Device

Transmitter - T1.0109

Transmitter - T1.0328

Receiver - R1.0328

Receiver - R1.0109

2- Heden Motors

M28VP-20486

M28VP-20228

IDX Battery Charger Serial #K2-02415

IDX Power Cube Battery - Serial # AY-00405

IDX Power Cube Battery - Serial # AY-00406

IDX Power Cube Battery - Serial # AY-00407

IDX Power Cube Battery - Serial # AY-00408

These items were stolen on 12/15/2008

From North Hollywood, Ca

Please Contact:

818 298 8106

Thank You.