Jump to content

Gil Solorzano

Basic Member
  • Posts

    4
  • Joined

  • Last visited

Everything posted by Gil Solorzano

  1. Hi everyone I've been rebuilding an early 50's vintage H16 which was completely frozen, and so far I've dissembled the camera, cleaned it, obtained new parts where needed, and have actually reassembled the workings. It runs! And yes, I have a repair manual which has been essential to this project. I realize there's much more to it like alignment and adjustment, but until the camera is film tested can it be determined if the rebuild was a success. And I do intend to use it once this is done. This camera will compliment my vintage H8 and REX1. The REX was professionally serviced. Anyway, thank you for staying with me, now if anyone has tips, advice, sources, parts, etc, please, anything would be appreciated. Right now, I'm looking for light seal materials. My supplier informed me sealing material for older cameras is no longer available, but didn't elaborate on substitute materials or methods. If anyone has information, how to, or advice, please and thank you! Also, are there special lubricants for the Bolex? If so, what type? Are they easily available? And what substitutes an be used? Well, thank you folks, I intend to get this camera running, and I have discovered that taking it apart was a challenge but was easier than I thought; and putting back together isn't that hard. The challenge is the adjust, sync and alignment. I sincerely thank each and everyone one of you who respond with anything, including stories and anecdotes about using these great cameras Cheers Gil in Washington DC USA
  2. Hi everyone I've been rebuilding an early 50's vintage H16 which was completely frozen, and so far I've dissembled the camera, cleaned it, obtained new parts where needed, and have actually reassembled the workings. It runs! And yes, I have a repair manual which has been essential to this project. I realize there's much more to it like alignment and adjustment, but until the camera is film tested can it be determined if the rebuild was a success. And I do intend to use it once this is done. This camera will compliment my vintage H8 and REX1. The REX was professionally serviced. Anyway, thank you for staying with me, now if anyone has tips, advice, sources, parts, etc, please, anything would be appreciated. Right now, I'm looking for light seal materials. My supplier informed me sealing material for older cameras is no longer available, but didn't elaborate on substitute materials or methods. If anyone has information, how to, or advice, please and thank you! Also, are there special lubricants for the Bolex? If so, what type? Are they easily available? And what substitutes an be used? Well, thank you folks, I intend to get this camera running, and I have discovered that taking it apart was a challenge but was easier than I thought; and putting back together isn't that hard. The challenge is the adjust, sync and alignment. I sincerely thank each and everyone one of you who respond with anything, including stories and anecdotes about using these great cameras Cheers Gil in Washington DC USA
  3. Hello So there is somebody left and the lights haven't been turned off. Anyway, I've been trying to contact you cats and have not recieved any replies. i need light sealing materials for an older H16 I'm rebuilding. I've purchased parts from one of your agents (Chanbless Cine in Atlanta USA) and I was informed light seal materials are no longer made for older cameras. Do you have a substitute? Is it possible to use other materials? While we're at it, does the camera take special oils and greases? Can you use a light teflon based grease? Can you use a light 20w non detergent oil? If these are unacceptable, what do you recommend and do you sell them. Also, I hope you guys finish your website. I know these times have been frustrating, but we really want to see Bolex up and running so we can keep your beautiful cameras running. Look forward to hearing from you
  4. Hello, I am in need of a early Bolex H16 service manual. I have an H16, double perf 16mm, and would like to service, and teach myself how to fix these little jewels My name is Gil Solorzano, the date is Aug 6, 2020, in the coronavirus times. email me at: gsolor@hotmail.com thank you
×
×
  • Create New...