Hunter Zimny

Recently I've been having an odd specific problem with my AATON XTR Plus. For some reason lately I lose 24FPS crystal sync and my camera will periodically drop to 20FPS. It happens erratically with no clear reason. I've caught the issue in the eyepiece, cut and re roll then the LCD will go back to displaying 24FPS It's happened in a variety of situations, using both voltage regulated gold mount adapters and the original 12v AATON batts. I'm fairly convinced it is not a power issue. The FPS speed dial on the camera is locked firmly at 24. Has anyone had this issue with their AATON? Here's a video showing the issue. https://www.youtube.com/watch?v=Q16IpTVHACo Any advice or opinions would be greatly appreciated Thanks

Hey folks, I'm looking for some sample footage of 200T 7213 with and without the 85 filter. Thanks!

Thanks Tyler! When you have this issue is it consistent throughout the roll?

Hey folks, I come seeking advice and opinions. I've had a random jitter shake that happens sometimes from an Aaton XTR plus. It's not detrimental and can usually be stabilized in post, however I'd love to fix it. Sometimes it will happen in the middle of a shot, sometimes it will happen throughout a take but it's totally unpredictable. Half of the time it doesn't happen at all. The jitter is always vertical and varies in severity. We thought it was a mag issue but on the last project it happened on a rented mag which I've shot a feature worth of fresh stock on without issue. I think it's a problem with the pull down claw. The camera and mags have been serviced twice by Girvan at Abel cine. Both times it was fully disassembled and cleaned including the claw which was adjusted but the issue persists. Here's a video sample : https://vimeo.com/536103776/f73df3f48d Have any of you experienced anything like this? Any thoughts are greatly appreciated. Thank you!

Hey folks, I come seeking advice and opinions. I've had a random jitter shake that happens sometimes from an Aaton XTR plus. It's not detrimental and can usually be stabilized in post, however I'd love to fix it. Sometimes it will happen in the middle of a shot, sometimes it will happen throughout a take but it's totally unpredictable. Half of the time it doesn't happen at all. The jitter is always vertical and varies in severity. We thought it was a mag issue but on the last project it happened on a rented mag which I've shot a feature worth of fresh stock on without issue. I think it's a problem with the pull down claw. The camera and mags have been serviced twice by Girvan at Abel cine. Both times it was fully disassembled and cleaned including the claw which was adjusted but the issue persists. Here's a video sample : https://vimeo.com/536103776/f73df3f48d Have any of you experienced anything like this? Any thoughts are greatly appreciated. Thank you!