Search the Community

Hey everyone! I'm selling my Bartech BFD because I've had a slight career shift and my new work doesn't need the beefier setup of the BFD and M-One Motor. Everything is in used condition, but works great. I have lots of detailed photos and I'm happy to take specific photo requests if you have something you want to see in detail before buying. I'm including everything pictured (except the table or cyc wall). There's a lot in this kit, but I'll break it down as best as I can. Frankly, there's a few cables that came with the BFD when I bought it that I'd be unable to identify properly, but I've included the detailed pictures of all cables and connectors. Here's what's in the kit: Foam-Fitted Handheld Case An ORIGINAL printout, analog paper Manual with OEM staple. Bartech BFD Wireless Transmitter - Handheld Focus Puller (S/N T1.0154) Spare Markers for BFD BFD Hardwire Cable. 25' Cable connecting the Transmitter to the Receiver in case of signal loss or faulty connection. Works great on jibs or cranes. (Reference: Image B) Bartech BFD Wireless Receiver (S/N R1.0154) Horizontal and Vertical Mounts (15mm and 19mm) New Antenna (Not pictured; I lost the original plastic antenna cover, but ordered an entirely new OEM replacement antenna.) BFD Receiver Gimbal Mount - Hard-wire Remote Control for use on a Steadicam, Movi or Ronin. (Reference: Image A) M-One Motor (S/N M-1.0010) Six gears with varying pitches for different size lenses: 0.8m - 32P (2x), 0.5m, 48P, 0.4m - 64P, and 0.6m 15mm, 17mm and 19mm rod adapters for proper mounting fit Misc Hardware for Receiver Mount and replacement screws Additional Cable Assortment 3-Pin male to 3-Pin male LEMO long hardwire power extension cable (Looks to be about 10-15 feet long. I can confirm if you'd prefer, just let me know!) (Reference: Image H) 5-Pin male to 5-Pin male LEMO connector cable from receiver to motor (Reference: Image D) 3-Pin male to 2-Pin male LEMO to power receiver from Steadicam Zephyr (and others with similar 3-Pin connector) (Reference: Image I) Anton Bauer D-Tap male to 2-pin LEMO male to power the receiver from an Anton Bauer battery or V-Mount adapter with proper D-Tap connector. (Reference: Image G) 12V 4-Pin XLR male to 2-pin LEMO male presumably powering the receiver off of beefier film cameras or battery connectors (Reference: Image E) Unidentified 2-pin male LEMO to a fun, half 2-pin male, half 2-pin female connector that I've never seen before or needed to work with. If you recognize it, you get bonus points. (Reference: Image F) I think this last one is an old Panavision connector, if memory serves. But, I'm really not certain on this one either. It's a half 1-pin male, half 1-pin female LEMO connector and a fat 11-pin male connector on the other end. (Reference: Image C) Price: $3750 USD FREE SHIPPING to USA. Will provide quote for international Shipping. Payment via Paypal for Shipping or cash for Local Pickup: Boston area) Pictures attached: