Search the Community
Showing results for tags 'camera service'.
I know some people on this forum feel like nobody should touch a camera if he or she is not a technician and at some extent I agree. I have a couple of nice cameras that I love and those cameras have been properly maintained by technicians and I know how expensive it can be and I paid to get it done, but some times there is no technician whiling to work on your camera (Nikon R10) and some insensible people in GA are happy to say send the camera we can fix it, I sent its they said Nikon doesn't sell parts any more... Are you kidding me? You didn't know that? I opened the camera and fixed it myself and I did a clean job not like that guy. In a different case I just got an extremely dirty gray Scoopic, after hours cleaning it it was like new, but no image on the viewfinder. I noticed a rattling noise in the light meter area, I checked for light on the gate and there's none, so that's the prism out of place. I paid $130 for the camera, and just sending it to the east coast is going to cost me that much, not mentioning the $400 + that it's going to cost to get it fixed, but my main point is I have a Scoopic MS and I bought this camera to do some experimentation, I never intended to use it, so my options are selling the camera for parts or trying to fix it myself. I got the service manual, it was kind of scary the amount of things you have to remove to get acmes to the main part, but I did it and when I was there it was so dirty, the light seal foam solidify (very common issue) and there was a messed inside all over the place mixed with dust and there was the prism just out of place. I started cleaning all the mess and I can see how the camera appreciate what I'm doing. Every time I clean something it feels like the camera is going to be better, even if I don't add lubrication I'm eliminating that dust and the friction that it causes, I'm feeling confident that I can put it back and the camera will work again as a U16 camera. Again I know some people think is not a good idea, but I'm very detailed oriented, I know how to use tools, I understand how cameras work, I have time and patience, I can solder, I have made repairs on still photo cameras and I want to do it, because I want to learn. I have searched for schools and I couldn't find one and there are a copule of mediocre camera shops here where I live, so no way to ask someone to tach me. I know it's a long post but I needed to make a point. Now what kind of lubricant shouldI use on gears, plastic, metal, joints? Grease or oil and what kind? Even more important, what are the guidelines to use either one? I know oil must be applied in very small quantities, if you can comment on that I would really appreciate it too and again even better what are the rules, guidelines or principles? Thank You so much in advance and sorry about the long post.
I've just finished documenting the complete strip down of a Bell & Howell 35mm Eyemo: http://cinetinker.blogspot.com.au/ Very similar mechanically to a 16mm 70 series Filmo. These cameras have an uncased spring, so they can be very dangerous to dismantle. Personally I wouldn't recommend inexperienced people doing anything more than removing the front. But I figure if people are going to try it they're better off having some idea of what's inside.