Search the Community
Showing results for tags 'for sale'.
-
$900 Or Best Offer. Very rare item, in very good condition. These were only made circa 1982 for the Arri 3C, but are compatible with the 2C as well. 24 or 25 fps crystal switchable. Or, switch to variable mode (non-crystal) for other speeds. I was told the small 4-pin port is for connecting a speed controller for getting crystal sync at other speeds. Powers from 12V 4-pin XLR connector. Can run forwards or reverse - it has a switch for that. It needs a phenolic gear to connect to the drive gear at the bottom of the camera, but that's included with this motor. The motor has captive screws to attach to your 2C or 3C. No power cable included. This item is currently in Los Angeles with a friend. Thanks, Rich
-
Hey everyone, I'm new to this site, and I come bearing gifts! More like selling a single gift, but it's a nice one! This camera has 2318 hours on it. It's in great condition, I've never had a single issue with it. It was serviced by Arri about 2 years ago, right before I bought it. Comes with 5x 64gb SxS cards, EVF, and various other cables and accessories. I'm asking $24,000 but I am open to negotiate. Email me at contact@caseycross.com if you are interested.
-
I am selling my personal ARRI Alexa Classic EV camera kit, see below: 1x ARRI Alexa EV Camera w/ High Speed License SN:3245 1x Pro Res Codec Option 1x EVF-1 Electronic Viewfinder SN:2054 1x VMB-2 Viewfinder Mounting Bracket 1x VEB-1 Viewfinder Extension Bracket 1x CCH-1 Center Camera Handle 1x HEB-2 Handle Extension Block 1x BP-13 15mm Bridge Plate 1x BPA-2 Bridge Plate Adapter 1x WA-1 Wedge Adapter 1x LB-1 Levelling Block 1x SP-4 Shoulder pad 1x AC Power Supply 1x Gold Mount Battery Adapter Back 1x IDX A-AB2E V-Mount Battery Adapter Plate 1x 2GB SD Card 1x 128GB SxS Card 2x 32GB SxS Card 1x 64GB SxS Card 1x SXS Card Reader SBAC-US10 1x Short Viewfinder Cable 1x Long Viewfinder Cable 1x Alexa 12V Accessory Cable 1x 3-Pin XLR Power Cable 10' 1x Audio Y-cable (5-Pin XLR to 3 Pin XLR) 1x Alexa Body Hard Case by Innerspace Cases 16,000 USD
-
We have ARRILASER 2K for sale from EU
-
Selling my Miller Arrow 55 head. I bought it brand new in December 2008, sole owner. Design hasn’t changed at all as far as I can tell (product photos from BH and such) It has served me well for the past couple of years but I no longer own a heavier kitted camera like a Red and I moved to something smaller. Haven’t used it for about 2 years. The head can hold up to 25kg (55 lbs). It used to hold my Red one with lens, mattebox, rods, battery etc. with no problems. The head has been sent to Miller Europe for check up and eventual repairs at the end of 2014. And it is still there as I had some personal problems the past year and couldn’t find the time to put it on sale. They replaced some clutches that were worn out, due to usage (the things that make the drag settings work), checked the whole thing up, greased everything and put it back together so the head is as good as new mechanically. I can also provide the repair quote if anyone’s interested. Cost a lot :). Just some scratch marks aesthetically on the most used areas as you can see in the pictures. My asking price for it is 4100 euros + shipping to wherever you’re from. I accept PayPal and wire transfer but PayPal is preferred. As i’ve said, the head is still located at Miller Europe (UK), so if you’re from the UK or Europe shipping will be less or you can pick it up yourself if you’re close to their location. Of course if you’re nearby you can go and test the head before buying it or you can drop them an e-mail with any questions that you have. I talked with Leanne there (leanne@millertripods-europe.com), she knows about the head and will kindly answer all of your inquiries. You’re buying a great piece of gear that has been well taken care of and has never failed me on the field. Make me an offer I can’t refuse :) So to recap: PRICE: 4100 euros + shipping METHODS: PayPal (preferred), Wire transfer LOCATION: UK, Miller Europe HQ (Shepperton, Middlesex) PHOTOS: http://postimg.org/gallery/1jhxxn8du/ -
You are looking at my trusted Sony PMW-F5 Camera. I've just upgraded to another system and unfortunately have to let it go. The system only has 634h on it's back and includes the 4k upgrade that allows for internal 4k recording. The package includes: 1x Sony PMW-F5 camera body and handle (PL-MOUNT) 1x Sony DVF-L350 3.5" Color LCD Viewfinder (Loupe included but not fully functional) 1x Sony SxS Pro+ 64GB Card 1x SxS Card Case 1x Movcam Shoulder Rig with sliding baseplate and shoulder pad 1x Movcam Right Handgrip Batteries (V-Mount) are NOT included. New this set up cost me $22k. I'm offering it for $8999 incl. Free US shipping. http://www.ebay.com/itm/122590849000 It's a great camera and has worked for me very reliably with no corrupted files or any other technical hick-ups. Neither screen nor sensor have any dead pixels or other glitches. It's never been rented out and has only been used on my own shoots. IMPORTANT NOTE: the camera is updated to version 7.01 and since it's one of the first units (Serial: 0100383) released it CAN ONLY be upgraded to version 8+ by Sony, which is a free procedure they provide. It's fully functional now and I've tested this version for 100h+ so far with no problems. All sales are final and there are no returns accepted, so please feel free to ask any questions before buying. I only ship to CONFIRMED Paypal addresses and NO PO Boxes. Thank you for your interest! More pics on ebay:
-
ARRIFLEX 16SR 3A £2,500 GBP (ex VAT) Condition: Used Warranty: 3 Months Op hours- Various ARRI SR3A Camera Body Ground Glass SR MB17 ( B) 4" Matte Box + 4x4 trays French Flag Support Set of Mattes MB17 Top Flag SR LWS-2 Lightweight Support Donut 87mm 80mm insert ring Extension Viewfinder (Standard) SR3 Camera Battery Adaptor 24v/12v On-Board Adaptor Shutter Key (Fitted) Sr3 IVS PAL SR3 400'/122m Magazine x3 If you require any further information, please email me at Casey@esbroadcast.com.
-
for sale is a Angenieux 15 - 150 f/2.8 PL mount lens in perfect condition. I boguht this lens in November '16 and had it serviced at Cinematechnic LLC. It came with a cobbled up mount and I had it replaced with a Arri/zeiss style PL mount. I used this lens on an Arri sr2 and it gives an amazing image. Here is the ebay link. http://www.ebay.com/itm/252947116134?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649 taking offers but really looking for 1400$ shipped
-
Link to this item on ebay here: http://www.ebay.com/itm/252949577199?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649 For sale is a full Arri sr2 kit. I bought this kit back in December '16. I got lucky when buying this camera from Alan Gordon Enterprises as everything was already in great condition, but I had it serviced at Cinematechnic LLC in LA as well. Includes: 1 - Arri sr2 Highspeed 16mm camera with crystal speed control 3 - Arri 400ft Magazines 1 - Collapsable Core 1 - Delwault battery adapter 2 - 12v dewalut batterys 1 - Dewault charger 1 - Euro Dewault charger 1 - 4 prong XLR battery cable 1 - Arri handgrip (possibly selling separately but for now is included in package) 1 - Arri support rods 1 - Arri Battery Charger (no arri batts included) 5 - white film cores 6 - Core adapters 3 - 100ft Film spools 1 - Large Pelican Case One great feature of this package is the custom Dewault Battery Adapter. These batterys last much longer than Arri batts and charge much faster. taking offers -
Hey all. Still got a bunch of 4x4 filters for sale; need them gone by Sat ideally, if anyone is interested, or knows anyone who may be they're $100 each. Tiffen ND.9 SE Grad Tiffen ND.6 SE Grad Formatt 1/2 Coral SE Grad Tiffen FLB Tiffen 82 Tiffen Tobacco 2 Tiffen Sunset 2 (one of my absolute favs) LMK or if you want them all; hell make an offer. will also include beat up halliburton case if you take 'em all drop me an e mail, adrian@adriansierkowski.com Will ship, if you'd like to lower 48 but not sure on pricing for that.
-
$750 Or Best Offer. If you own an Arri 3C and want to shoot anamorphic, this is something you'll want. You can shoot spherical, or flip a switch and the optics will desqueeze the anamorphic image so you don't have to frame up your image with everyone looking skinny. A very rare door, unique to the 3C, so certainly nice to have if you ever want to shoot anamorphic on this camera. Thanks, Rich
-
[Complete Steadicam System] The time has come for me to part ways with my starter steadicam rig! I bought the system about 2.5 years ago and it has done me well. The arm was recently serviced by Tiffen. The sled recently serviced electronically and mechanically by Terry West and Robert Luna so it is up to specs! This is a fantastic starter package for someone looking to get started with a pro rig. Sled, monitor yoke, dock, and various bits and pieces come in a standard production hard case. Included is a universal mounting plate. The sled is all upgraded internal HD and 24/12v internal power wiring. There's also an analog BNC and HD BNC that runs through the system. 2 Anton Bauer battery mounts have been added as an upgrade to the sled for power. Cam jam monitor arm with yoke is a must have. Has greatly helped with my rig balancing and switching back and forth from low mode. You simply just flip the monitor and it doesn't change anything with the rig's balance. The yoke fits pretty much any monitor you'd want to put on it, but additional spacers may be required to fit the different monitors out there. I have spacers for a SmallHD DP7 that I will include. Most will say the Master Series sled doesn't fit onto the IIIA arm, and you are right! Luckily I got a new post from Robert Luna that makes the 2 compatible. Works flawlessly. Ultra II vest shows some signs of regular use, but is still in great working condition. Safety release works perfectly, socket block is undamaged. Bartech analog unit has been fantastic. Includes a hand unit, receiver, motor, and various power cables, motor cable, etc. Anton Bauer LP2 Dual Gold Mount charger with 2 HC Dionic AB batteries. Both were recently sent back to Anton Bauer to get re-celled. The batteries are in perfect working order. See below for a list of what's included. There are a few things I didn't talk about here. Included: -Master Series upgraded HD sled -Docking bracket -Low mode bracket -Camjam monitor arm with yoke -Various BNC cables, tools, miscellaneous bits and pieces -Hard case for the sled, docking bracket, cam jam monitor arm and yoke -CP IIIA arm -Allen wrench for adjusting the arm tension -Rain cover for the arm -Master Series sled compatible post for IIIA arm -Long post -Bag for the arm -Ultra II vest with socket block (can be switched to either side of the vest) -Soft bag for carrying the vest, arm, rain cover, and Mitchell hard mount -Mitchell hard mount -Bartech analog wireless follow focus receiver -Bartech hand unit -Wireless follow focus motor -15mm rail adaptor for motor -Power and motor cables for Bartech -Bartech system carrying case -Anton Bauer LP2 dual gold mount charger w/power cable -2 HC Dionic AB batteries Total is $24,400 This is practically everything you need in order to get operating. It's also a fantastic back-up rig. Please contact me if you have any questions. Buyer pays shipping costs, PayPal (or any other money transfer) fees. I'd prefer to do this over PayPal. Bill of sale will be sent to buyer. If you refer someone else (who actually ends up buying the system, that is) I am willing to pay you $300. So please refer! All pictures are of my equipment. No stock photos or anything. Link to the pictures are here because on this forum I can only upload 300KB of files: Photos (Including Photos of the Bartech): https://flic.kr/s/aHskR4sU77 -
Arri Alexa XT for Sale Purchased 5/2013 2058 hrs $60,000.00 OBO Like New- The camera was consistently maintained by Arrirental/CSC in New York and Keslow Camera in LA and has all of the current licenses. Pictures and info available by request hupfel@gmail.com, 917 698 1711 As of 1/17 this camera will imminently be upgraded to SXT by Arriflex. This process takes 1- 2 weeks and adds a considerable amount to the price. All original parts included and a custom travel case: Arri Alexa XT Plus Hours:2058 May 2013 Open Gate EVF-1 Viewfinder VF Cables 2x Medium 2x Short VF Extension VF Mounting Bracket Gold Mount battery Adapter back Shoulder Pad Center Camera Handle SD Card 3x XR 512gb Capture Drive Single Dock For XR Drives USB 3 Ethernet Cable Handle Extension Bracket Handle Extension Block Bridge Plate Adapter 2x Power Cable Wedge Adapter SXS Adapter 12v accessory cable x2 Leveling Block Case -
Anyone out there have any leads on where to find a Arri 416 package? I've contacted a bunch of different rental houses and Arri reps all over the world but no luck yet. If anyone has any info that would be greatly appreciated :)
-
Hey all, I have an Aaton Aminima Super 16mm camera package up for sale. It's in excellent condition and was recently serviced at Abelcine. I'm currently traveling but if anyone is interested I can put together some photos and reference videos when I get home. Here's what's included: - Aaton Aminima - 3x 200' mags - 3x daylight spools - Onboard Aaton side battery - Battery charger - Video tap - Wooden handgrip w/ lemo connector - 15mm rods - Carrying case - I also have a roll of 250D and 50D that I'll toss in as well :) Asking for $5,000 but open to offers. The camera is located in SLC, Utah. Will accept PayPal. Please feel free to reach out with any questions. pendleton.tanner@gmail.com 978-340-2012 -
Hello, I have a complete, ready to film Panasonic HVX200 package for sale. It includes many lens accessories and plenty of media. See below for the detailed list: • 1x Panasonic HVX200p HD 1080/720p 24p video camera (incl. remote, mic holder, shoulder strap) • 1x Porta Brace DVO-2U DV Organizer carrying bag • 1x Porta Brace RS-HVX200 Rain Slicker camera protection • 2x Panasonic P2 media cards 32GB • 1x Panasonic P2 media card 16GB • 1x Panasonic P2 media card 4GB • 2x Batteries • 1x Battery charger & AC power supply for camera • 1x Panasonic AJ-PCD20 5-Slot P2 Card Reader (FW800/USB2) • 1x Century Optics/Schneider .75x Wide Angle converter (incl. lens cap, protective bag, and sun hood) • 1x Century Optics/Schneider 2x Telephoto converter (incl. lens cap, protective bag) • 1x Century Optics/Schneider +2.6 Achromatic Diopter (incl. lens cap, protective bag) • 1x Hoodman H400 monitor hood • 3x Tiffen 82mm Filters (Rota-Pola, ND.6, Clear) • 1x Varizoom VZ-Rock-PZFI Lens Control System (incl. 50ft extension cable) • 1x Zacuto ZipGear for follow focus • Various BNC/Component/FW400/USB2 cables Items are located in Los Angeles and I prefer a local buyer but can ship at buyer's expense. Everything is in great shape and most lens accessories have never been used. Price: $4000 USD obo Please contact me for any remaining questions. Thank you!
-
GLIDECAM V25 with extra accesories for sale. Hello Friends, I have really well preserved Glidecam V25 for sale. Everything is in full working order. Ready to fly. It doesn't have any repairs and you dont have to do anyone. I used it with care because i now how to. In fact this one has upgrades. There is a new 7" HD monitor with HDMI. You can use the serial one like backup monitor. The reason for the sale is my deteriorating health. Stuff list: 1. Pelicase 1650 with foam for the sled 2. trolley bag for the vest and arm (cover for the arm too) 3. New Manfrotto tripod for the Docking 3. Original SONY Batteries and a charger 4. Low mode bracket 5. J-bracket and long post, from Jerry Hill 6. Arm rain cover, from Jerry Hill 7. Rain cover on set 8. 7" Monitor Liliput and backup monitor Glidecam. 9. The wires. The GALLERY with main poster i prepared for you and other photos https://drive.google.com/open?id=0B1yG4Vudiq-_aXh5SmZjNTJDRU0 I will including the box tool too. The price is 6500EU. You can pick it in Poland (Warsaw) or pay for the sent. I prefer if you came here to Poland but it is your choice. The dimension are: The Pelicase 1650 (LxWxD) 78.1x52x29.30cm 16,800kg of weight The trolly with the vest, arm, batterys,tools... LxWxD 76x34x34cm 18.200kg The tripod 109x15x7.5cm 2kg If you have any questions, just let me know. lukaskrzeminski@gmail.com or PM Best regards! -
I'm selling my O'Connor O-Focus Follow Focus. Overall it's in good condition and works well. Only selling because I recently upgraded. Includes: • 15mm LWS Rod Support • (2) CFF-1 Handwheels • Speed Crank • Handwheel Extension • (5) Focus Gears (not pictured) Asking $2,500 OBO. Retail price is over $3,200 new. I'm located in Los Angeles.
-
Hey guys, I have a few more I'm tossing up for sale this week: -- 2060HD (with case) + Standards & Babies. I'll throw in adapters and a euro ball hi-hat too. Sticks are Mitchell but you can grab a Matthews or Backstage bowl adapter if you want to go euro/150mm. The head is ready to rock for either Mitchell or Euro ball. *** $7000 and its all yours. -- MB20II Mattebox One more up for grabs. We bumped to 6x6's, so this box has to go as well unfortunately. Great 3 Stage ready to go. Three 4x5.65 trays, Flags (Top and Sides), Mattes, Bellows, 114-110 Ring, 100 and 80mm plus 19mm Rod Adapter *** First $2950 takes it.
-
I'm selling my Angenieux Optimo Dp Rouge 16-42mm imperial zoom for $13,000 including a custom Innerspace hard case, a $516 value. It's in excellent condition and has been rarely used. It was purchased a couple years ago with the intent of renting it out, but I just don't have the clientele for it and it has sat largely unused. I've used it a few times on personal projects and love the characteristics of this lens, but I can't afford to hang onto it longer. Comes with custom Innerspace hard case. I live in Los Angeles and am happy to demo locally. Or I can ship worldwide at your cost. Can take credit card payment for extra 2.9%. More photos at https://www.dropbox.com/sh/reslf2sxt4f4n77/AADxuoDCmJlyxVgHdOB_M5aLa?dl=0
-
Hey everyone, I am currently selling an Arriflex SR Regular 16mm camera package. Here are the contents: Camera: Arriflex 16SR Regular 16mm Camera in Arri B/S mount Three magazines Batteries XLR cables Other power cables and battery chargers Magazine covers Eyepiece cup Handgrip Monitor: Sony B&W monitor Accessories Mounting equipment Cables Film: Some 16mm scratch film Crystal Control Speed: Crystal Control Speed that allows any framerate up to 75p. Cables for that and other accessories PM me with your best offer or if you want to see pictures! Or email me at tonymdupre@gmail.com Thanks!
-
Selling a Cinema Products Steadicam 3a sled w/ green monitor. Anton Bauer battery mount. In okay condition, lots of use. Fully functioning. Includes case. PRICE: $2100 Please respond to thread if interested or contact: jacobmitchell@c49productions.com
-
Selling a set of Tiffen IRND's 0.3-1.8, sizes in Panavision 4x5.650". The set is 2 years old, is color matched and not faded, still in silver protective bag. Selling entire set for $1,600. Available for p/u in LA, or can ship elsewhere. Tiffen 4x5.650 Infrared Neutral Density Filters 0.3-2.1 Mfr #: 45650IRND3, W45650IRND6, W45650IRND9, 45650IRND12, 45650IRND15, 45650IRND18 Tiffen 4x5.650 Infrared Neutral Density Filters 0.3-2.1 are a combination Infrared and Neutral Density filter that reduces the amount of light passing through the camera lens without changing the color of the scene, while also reducing the amount of infrared light entering the camera. The Tiffen IR ND series is produced using Water White glass. As with all Tiffen filters, IR ND filters are ground and polished to provide the greatest level of flatness and parallelism. This, together with their exclusive ColorCore technology, ensures the highest level of optical quality. The IR ND and IR 85ND filters are available in Panavision 4x5.650 sizes.
-
Hello, I purchased film from a studio that was closing. A ton of 35mm and 16mm. I would like to sell all the 35mm in one sale to help finance shooting the 16mm. Here is a list of the 35mm film for sale: 5 Canisters 400' / Stock 5279 / 500T 3 Canisters 400' / Stock 5218 / 500T 2 Canisters 400' / Stock 5248 / 100T 3 Canisters 400' / Stock 5246 / 250D 2 Canisters 400' / Stock 5277 / 100 1 Canister of 400' High Speed Color Reversal Daylight Asking $1,200 for everything. Aloha, Mike mike@alohabigmike.com
-
I have a set of Zeiss Ultra Primes I'm putting up for sale. 16/24/32/50/85 T1.9 Extremely well cared for, in beautiful condition with only some minor cosmetic housing marks and maybe one or two hard to see cleaning marks on a front element of one of the lenses. They were purchased in 2014 from Visual Products in Ohio. Serials: 16mm #8916351 24mm #8921976 32mm #8916093 50mm #8921953 85mm #8916381 Pictures available on request. Price: $57k Email soderbergfilms@gmail.com if interested. Thanks!
