Search the Community
Showing results for tags 'Bulbs'.
Found 4 results
I have two lights with bulbs that need replacing, but these are halogen lights that kind of intimidate me still. One of the lights is a PBL MXLIGHT with two long skinny halogen bulbs, The other is a Britek. I took the bulb out of the Britek and it says "500 watt 120 volt" on the side, but no brand name. So two questions: Will any halogen with the correct watts and voltage work with a halogen light And: If i use a lower voltage and wattage, will it work but not be as bright? I don't want anything to explode in my face here. I found the website 1000 bulbs but I don't want to buy without confidence. Most videos i'm finding online are for LED's which I neither own nor am a fan of.
Hi, I'm looking to shoot a night interior scene and had a few questions about practical bulbs. 1. Is there a specific brand of bulbs that will work best? Or you can recommend? 2. Whats an ideal wattage for the bulb? 2. Do frosted bulbs work better? 4. Do I have to worry about tungsten bulbs flickering? 5. Is a dimmer necessary? Thanks!
Hey everyone. The other day I was testing out different bulbs in my 1K fresnel to see how wattage correlates to output (switching from 750 to 1K only resulted in 1/3 stop difference, which I found really surprising). I did something stupid though: since I only had my light on for a few seconds to take a quick light meter reading, I thought that the lamp probably wasn't that hot, and waited far less time than I normally would for it to cool down. Basically, I touched the bulb with the gloves I happened to be wearing at the time (which aren't real proper leather electrician gloves but rather a pair I found at Home Depot with faux leather-like tips on the fingers designed so you can use touch screens), and some of the faux leather finger tips melted right onto the glass of the bulb. Fortunately, these gloves are thick enough that I didn't get hurt, but unfortunately, I have this melted stuff stuck to my lamp. Are there ways to clean off lamps? I know mine might even be a lost cause now, but this seems like it might be useful information for the future. Thanks.
I'm planning to shoot an extended fight scene in a hotel room. Not a fancy hotel, think Days Inn. We will be shooting very quickly and I want 360 degrees of camera movement, with no apparent lights in frame. I'd like to shoot the whole scene at one f-stop, being able to move actors in and out of light and shadow as need be. Maybe f4, so focus isn't a huge pain. I'm shooting on a GH3. These are the two options I came up with… 1) swap practical lamp bulbs for 100W or 200W bulbs. or... 2) put a 1K on the balcony and light room through slats in blinds. swap practical bulbs for 25w bulbs. Will option #1 cause the lamps to blow out, or can I arrange them so that there are pools of light serving as both key and fill? I am a newbie and need your help, so please impart your sage advice. My goal is to keep the lighting as simple as possible. Thanks so much!