Search the Community
Showing results for tags 'Instamatic'.
Found 3 results
Earlier today I purchased a Kodak Instamatic M6 Super movie camera. It is missing the battery and the cover for the meter, and I am unsure of what battery it runs. I put 3 batteries into the pack on the bottom, and put a cartridge of film on it, and as dumb as it sounds, I have no idea how to turn it on. I tried pressing the trigger, but nothing happens. Is it because I do not have a battery in the meter? And if so, what is the battery I need for it?
Hello Recently purchased a Kodak Instamatic M22 off ebay for £10 with some new film, the listing stated it was not tested but i took a chance anyway. So it came and didn't work, turns out the batteries had corroded so i cleaned it out and popped in some new AA's, pressed the exposure and sure enough the motor buzzed away like a bee. However having opened up the catridge slot i could see that even though the motor was working the film cartridge turner thingy wasn't moving, after a browse online i found out these things have weak gears that break so i got out the screwdriver and took it apart, all the gears are in great condition so i don't know what could be causing this to not work. Any help much appreciated, thanks
I just purchased a Kodak Instamatic M6 from ebay. It arrived in excellent condition, but was not working (the seller did not say it WOULD work) anyway I checked to make sure all the contacts were clean on the battery compartment, and the cartridge compartment looked decent...all in all it looked like it was in great shape. I opened up the auto exposure control battery part and there was only one battery in it and the battery was corroded a bit, so i removed it cleaned out the compartment and left the battery out. (I am going to buy the necessary two replacement batteries for the auto exposure control) The trigger pushed in, but the motor did not sound as if it were running. i pushed it several times but to no avail. (i think i heard the motor run for a split second twice, but nothing else) my friend looked onver the camera with me and we sprayed some contact cleaner on the regular battery contacts just to make sure. the trigger still did nothing. I held the camera up to my ear and heard a low sort of vibration, as if something completed a circuit inside the camera, but i did not push the trigger in...it was doing this by itself. I took the batteries out and it stopped. I came here and saw a forum post of someone having a similar issue and the replies suggested that the trigger may be "stuck" on or defective, or that the drive shaft gear is not working...because its neoprene and probably has broken because the camera is so old. FINALLY, after all that explanation my question is essentially what should I do now? I have a couple cartridges of film so i could pop one in and see if that works (but i dont see how that would change the trigger) or should i try and take it apart and clean the contact with the trigger, or is it the gear....or basically what are my options.