Search the Community
Showing results for tags 'broken'.
Hi, I have this made in Germany Kodak and I opened up the film door to make sure it was all in working order and now I can't close it. This camera is a little weird, you push a button to release the film door and I assume it is the same to close it, but it won't close. I'm a little stumped and was wondering if you guys knew anything. I'm planning on using this as my B&W camera and my Ricoh for color. Thanks!
Hey everyone, I was hoping I might find someone here who has experience with a Bell & Howell 2585 projector. A few months ago, I took my K-3 for a spin, shot a roll of film and had it printed. Long story short, I had a different Bell and Howell projector at the time that I put a lot of effort into fixing so that I could watch my test roll, but eventually discovered what was really wrong with it; a cracked worm gear. So some time passed and I still wasn't able to watch my film, which was very frustrating. Eventually I ordered a Bell and Howell 2585 projector off of Ebay that was I
Hello Recently purchased a Kodak Instamatic M22 off ebay for £10 with some new film, the listing stated it was not tested but i took a chance anyway. So it came and didn't work, turns out the batteries had corroded so i cleaned it out and popped in some new AA's, pressed the exposure and sure enough the motor buzzed away like a bee. However having opened up the catridge slot i could see that even though the motor was working the film cartridge turner thingy wasn't moving, after a browse online i found out these things have weak gears that break so i got out the screwdriver and took it apa
Hello, recently I bought a Bauer s 207 xl from eBay in unknown condition and long behold it was the victim of battery acid leakage. Unfortunately during me repairing the thing two darn wires broke, found where the first orange wire goes but this gray and green wire has me confounded and looking for answers. So here is all I know it is the close vicinity to the batt. test switch and then goes to a pot and a resister. But tracing it out and even ohming it out did not turn anything up. So this is where I'm at ether I need a service manual or if any one has this camera, to tell me where this wire