Search the Community
Showing results for tags 'handgrip'.
Found 4 results
Hi everyone, I own an Aaton LTR 7, and I was hoping someone would be able to offer some advice on a bridge plate / rig that would be compatible. The wooden grip handle that came with the camera constantly comes loose and is more annoying than practical for handheld shooting. I'd prefer to just sort a set up with rails and moose bars that I can adjust more easily. I found an ARRI BP-5 on ebay but it seems that they work best with 35mm / Digital cameras. Can anyone recommend an alternative bridge plate that could work? Any suggestions/ recommendations would be super appreciated! Thanks
The WCU-4 with a monitor and receiver (and battery) attached is quite heavy. And the regular hand position on the left side is very far away from the center of gravity. This results in high fatigue on the wrist. The JOE bracket allows to mount and adjust a monitor to the WCU-4 and has its own handgip which is placed much closer to the center of gravity. The weight is no longer carried by the wirst but by the much stronger biceps. When the WCU does not need to be carried around the handgrip serves as a docking bracket on a C-stand. The cam-jam JOE comes with its own quickrelease bracket on the monitor so nothing extra is needed. No noga arms, no cinelock, no spigots. https://shop.cam-jam...-with-handgrip/
Does anyone have the specs for the connector for the ACL ergonomic handgrip on/off switch . It has a stepped internal shape with total 2 pins, one on each step. Think it's a LEMO but not sure. Maybe someone like Jean-Louis will know this already. Also, do we know the current rating? Does it carry the power direct to the motor, or is there a relay? I wonder because the amps at 75fps can be high. Thanks, Gregg.
... we own a Aaton A-Minima Serial NR: A213 unfortunately we don´t have the Handgrip and the Nikon Mount and we would like to use our Old 70ties Nikon Lenses with it :/ is there anybody out there who could sell us a used Wooden Handgrip & the Nikon Mount and maybe a Top Handle for the A-Minima at a reasonable price? thanx Arthur