Search the Community

Up for sale is the Eclair NPR Super 16mm camera package in great condition. Package comes with these: - Camera converted to Super 16, with a PL Mount & "C" Mount; ground glass re-centered for S16. - Lens converted from its "CA" Mount to PL Mount. - New battery, cable and charger, tested to be fully functional. Items also included: - Angenieux 9.5 / 95mm... 1:2.2 lens PL Mount + sun visor and directional rod. - Protective cover and soundproofing / blimp... for camera. - 2 120meters magazines. - Perfectone motor. - 1 Flight case. - Facsimile of the original instructions for use. The Price is 1960 GBP (the cost of shipping not included) Items location is Wales. Camera and lens conversion fully done by Les Bosher; battery, cable and charger with modern components also replaced and tested by him. Camera recently serviced, and operation checked by the same camera engineer, it's all ready to shoot. No issues. Images below shows the items that come with the package. Attached Images:

I just got an Eclair NPR for a great price, and it came with this Perfectone Type MC 1440 C motor. I have done a lot of research and I couldn't fine any information about this motors. I read all the topics that I could find here in the forum and I found some interesting but mixed information. I understand the original motor didn't have any lights or switches. This motor that I have has a little bulb and it has a switch, for that reason I guess the motor was modified, but I don't know if it's Crystal Sync and I have no idea what the switch does. The XLR connector is a 5 Pin connector. I read at least two versions of the manual and it doesn't mention 5 pin connectors, it mentions that the Perfectone has a 4 pin connector. I learned by searching the threads here that some motors worked with an external box, but I have no idea what was it's function, I saw a picture of one of those boxes and it has a 4 pin Cannon connector too, so I'm confused. As shown in the picture of the removed Cannon connector at the base there are 5 cables coming out of the motor, I guess the two thin green ones carry pulse tone and the 3 thicker ones are the most important in terms of power, one is red which is the thickest one, one is purple and one is orange. Purple is soldered to pin number 1, orange goes trough the main power switch and ends up at pin number 4 and the red one goes trough the switch as well and ends up soldered to pin number 5. I'm going to test with a multi meter, but just looking at the circuit I think red is +, purple is - (coonected to pin 1 as the current standard) but I have no idea what the orange one does. Of course I want to replace the connector with a 4 pin standard so any help with that is welcomed too.