Search the Community
Showing results for tags 'toplight'.
Found 2 results
I'm going to build off of the setup in the attached picture for a hip hop cypher video. I'm going to build a 2 level pyramid stage for the rapper to stand on. The base will be a 5ft x 5ft square. He will be surrounded by 4 pillars (as seen in the picture) with 8 ft. kino bulbs attached to them. I want the key light to be a diffused top light, but controlled so that the field of light only covers roughly the perimeter of the 5'x5' stage. I don't want it to be a broad diffused light from the top that is hitting everything; I'm trying to create pockets of light and pockets of dark for a contrasty feel to the scene, but without super harsh face shadows. I want to see a difference in the light emitting from the quasars on the pillars and the key top light from above, and not spilling into each other. The perimeter of both levels on the standing stage will be lined with small LED strips which are mainly there for show, but may also serve as a slight under fill on the rapper. To achieve this directional, diffused top light, my first thought was to get 2 or 3, 4-bank kino fixtures and replace them with the brighter Quasar bulbs and mount them overhead. I'd cover them with light diffusion silk to soften. Then I'd use a black skirt that matches the perimeter of the stage to try and create a sharper field of light shining down in a more concentrated blast and not spilling everywhere. I assume the longer the skirt hangs, the more directional the light. A light haze will be in the room to show the rays coming down. One concern is that, for the amount of space we have overhead (square footage of lights mounted inside skirt and diffusion should match the 5x5 ft stage) I'm not sure if the diffused, skirted, quasars will be bright enough to get the "large soft, heavenly light ray from above" feel that I'm going for. I'm curious to hear of other ways to get this same type of light. Maybe there's another method that is more efficient? Maybe I should just get 1 x 1200w hmi and blast through diffusion? Pros & Cons? Other methods? I'd like to hear yall's suggestions. Thanks!
Hey Guys! I'm going to shoot a shortfilm set in a dry-cleaner's in a bit and am currently looking for inspirational films/scenes that use fluorescent top lighting as key, since i would like to go with fluorescent tubes that are already part of the location as practicals. I'm currently looking into "The girl with the dragon tattoo"; "Arrival"; "Fight Club"; "Fallen Angels" etc. to learn how to create dramatic/thrilling scenes through the use of neon/fluorescent light from above. (The ceiling of the dry-cleaner's is going to be pretty low, so I don't think I'll be able to hang Chimera Quartz's of any size, my initial idea was going with diffused Kinos or maybe pancakes if there is enough budget for it. I also would be happy about more ideas of Lights to use. I also thought about bouncing light into ultrabounce/musslin/silk attached to the ceiling, I'm not really sure if it's the right characteristic though, so I need to test this in the next few weeks) So if you have a few other films on your mind that utilize remarkable top lighting, and of course your own tips/experience regarding working with top-light, I would be glad if you could share them with me! I'm also happy about every bit of behind the scenes material of films using this type of lighting! Cheers!