Peter Duggan Posted February 8, 2006 Share Posted February 8, 2006 I'm very new to film. I've been shooting on digital for a while, but recently I've been making the move into film. I've been experimenting with super 8 film recently, and when I process it, there's a push/pull option for an additional $10. What exactly is this, and what are the benefits? Link to comment Share on other sites More sharing options...
Gordon Highland Posted February 8, 2006 Share Posted February 8, 2006 It's processing the film as if it were a different speed than what was shot. Say you shot on ASA 400 but didn't have quite enough light for good exposure, you could "push" it one stop (equivalent of a doubling of speed w/ each "stop") at the lab with a longer developing time as if you shot it on ASA 800. Results in increased grain, contrast, and saturation, some possible color shifting. Link to comment Share on other sites More sharing options...
Robert Hughes Posted February 10, 2006 Share Posted February 10, 2006 Since you're just getting your feet wet in filmmaking, you'd probably be better off shooting normal exposure for your chosen stock. Get to see and understand what normally exposed film looks like. You can spend years learning the basics without ever having to worry about push or pull processes. If you are in a bind with lighting and you just can't get enough exposure normally, then push processing has its uses. But you might just be better off getting more lights. Link to comment Share on other sites More sharing options...
Daniel Madsen Posted February 10, 2006 Share Posted February 10, 2006 Same effect as gain option (electronic pushing) on some digital video cameras- trying to get more from less at the cost of image detail. Link to comment Share on other sites More sharing options...
Peter Duggan Posted February 11, 2006 Author Share Posted February 11, 2006 Thanks for the responses guys. I'll start playing around with that on my next roll. Link to comment Share on other sites More sharing options...
Premium Member John Pytlak RIP Posted February 13, 2006 Premium Member Share Posted February 13, 2006 Remember, a "push-1" process doesn't really give an added stop of true speed. It just allows the negative to print/transfer more like a normally exposed and processed negative. A push-1 ECN-2 process normally gives added contrast and a bit more graininess. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now