Jump to content
Sign in to follow this  
janusz sikora

LOW KEY - Lantern

Recommended Posts

From your previous post, it seems you ARE going for the "TV studio" look for these setups...am I understanding you correctly? Because they certainly do feel studio-ish.

 

But still, very nice. I think it would have been even better had the main source been faked a bit, so it seems as if the main source is coming from the lamp itself.

Share this post


Link to post
Share on other sites

Here are some lantern shots I collected for research:

 

lantern1.jpg

 

lantern2.jpg

 

lantern3.jpg

 

lantern4.jpg

 

They all use an electric bulb, either in place of the flame in a frosted lantern, or hidden behind the flame, or in the final example from "The Elephant Man", an off-camera light, which is the more classic way of faking a lantern effect.

Share this post


Link to post
Share on other sites

Whenever I think of "Snow Falling on Cedars" I think of that first shot with the lantern being tied to the mast. Not enough can be said about the lighting in that film.

Share this post


Link to post
Share on other sites
From your previous post, it seems you ARE going for the "TV studio" look for these setups...am I understanding you correctly? Because they certainly do feel studio-ish.

 

But still, very nice. I think it would have been even better had the main source been faked a bit, so it seems as if the main source is coming from the lamp itself.

 

The location was natural apartment. I used the word "TV" in reference to - in my opinion- importance of lighting the subject from all sides in Low Key situation as to not lose the separation from dark backgrounds.

Lantern's motivated source was the Off Cam Light that moved with actors through their Block. Well... this sure was the idea of having it simulate the lantern.

In terms of value of the highlight i tend to exaggerate a bit believing that simulating reality is not very ineresting. I like little "spice"... Its got to be little bit like Italian Opera... I like to have fun.

Share this post


Link to post
Share on other sites
lantern4.jpg

 

They all use an electric bulb, either in place of the flame in a frosted lantern, or hidden behind the flame, or in the final example from "The Elephant Man", an off-camera light, which is the more classic way of faking a lantern effect.

 

When using an off camera light like this, do they simulate the movement of the latern by moving the off camera lights correspondingly? It seems if you didn't the illusion would be lost, and having to do so would be a hassle.

Share this post


Link to post
Share on other sites

Watch that sequence in "The Elephant Man" or a similar sequence with a candle in Deborah Kerr's hands as she moves through the house in "The Innocents" (also shot by Freddie Francis). You'll see a real choreography of moving lights on dimmers.

Share this post


Link to post
Share on other sites

If I were lighting a lantern scene I would probably place a three wick candle in the lantern with some tin foil or other kind of reflective surface inside in an attempt to blow out the lantern and direct the light onto a reflector pointing back towards the actor.

 

Would that actually work?

Share this post


Link to post
Share on other sites
If I were lighting a lantern scene I would probably place a three wick candle in the lantern with some tin foil or other kind of reflective surface inside in an attempt to blow out the lantern and direct the light onto a reflector pointing back towards the actor.

 

Would that actually work?

 

Well, when the actor pointed the candle flames at their face, then the candles would be blocked from the camera's view by the tinfoil. Is that what you want to see? Or would you rather see the candle flames? If the view of the flames are blocked to the camera, you might as well use an electric bulb in there.

 

The trouble is also that the actor moves the lantern around, so it's hard to hide one side of it always.

Share this post


Link to post
Share on other sites

I would have been aiming for a blown out lamp, but with a flame glowing in the middle. I would have also hoped that the intensity of the light would help to disguise the refelctor in the lantern.

Share this post


Link to post
Share on other sites

EDIT: I suppose I would just request an old North East England miner's lamp, they differ in the fact that light only comes from a small glass window on one side. Then I could line the inside with foil and it would blow out rather nicely. :)

Share this post


Link to post
Share on other sites
If I were lighting a lantern scene I would probably place a three wick candle in the lantern with some tin foil or other kind of reflective surface inside in an attempt to blow out the lantern and direct the light onto a reflector pointing back towards the actor.

 

Would that actually work?

 

The "problem" with Candle is that it simply is not enough light at 1/48 sec exposure. For cinematic effect it is good to have highlight on the face to be at Zone at least IV.... this you might get with candle being One Foot Away... Awkward on actor's movement...

Then ... it falls off so quickly that you get hardly anything else... except the small highlight area and no rest of the Face.

ASA 500 will not help you either. Its about Light.

Share this post


Link to post
Share on other sites
The "problem" with Candle is that it simply is not enough light at 1/48 sec exposure. For cinematic effect it is good to have highlight on the face to be at Zone at least IV.... this you might get with candle being One Foot Away... Awkward on actor's movement...

Then ... it falls off so quickly that you get hardly anything else... except the small highlight area and no rest of the Face.

ASA 500 will not help you either. Its about Light.

 

Kubrick did it at ASA 200 (100 pushed a stop) and F0.7 so we should be able to do it with fast lenses on 500 speed stock. I bet 5229 would do it beautifully.

 

There's no reason white skintone HAS to be around zone six, either. I see lots of times in real life where it's much darker and I don't doubt reality. You're very classical-studio-inluenced aren't you? ;)

Share this post


Link to post
Share on other sites
Kubrick did it at ASA 200 (100 pushed a stop) and F0.7 so we should be able to do it with fast lenses on 500 speed stock. I bet 5229 would do it beautifully.

 

There's no reason white skintone HAS to be around zone six, either. I see lots of times in real life where it's much darker and I don't doubt reality. You're very classical-studio-inluenced aren't you? ;)

 

Of course... I agree.

I guess it comes down to one's personal style (?)

No radical statements within our realm of interests.

Share this post


Link to post
Share on other sites

how about motivated light on a subject from a hanging incandescent (house) light..like a bulb? would a pepper or 650w tungsten with 250 or 251 diffusion be sufficient? I also have moonlight from the windows...the tough part is that the room has vertical blinds. there is an outside patio where the lights would be. i can angle them because the patio is quite long..longer than the window so i guess i can cheat them out of the shot. not sure it'll look authentic spaced fairly far apart. what are your thought? curtains seem ideal as natural diffusers. thanks for reading! Natalie

Share this post


Link to post
Share on other sites
ASA 500 will not help you either.

 

I tend to disagree...but OK

 

Also, might I ad that it's mighty important that the color temperature of your actor's light match the color of light that the lantern itself is emitting. The still you provided has a very yellow flame with a very white key light on your actors.

 

And what's with "It's About Light" being written in almost every other post you write (besides your signature bearing a link to your website.) Is that just a plug for your workshops? Or more of a slogan?

Share this post


Link to post
Share on other sites
I tend to disagree...but OK

 

Also, might I ad that it's mighty important that the color temperature of your actor's light match the color of light that the lantern itself is emitting. The still you provided has a very yellow flame with a very white key light on your actors.

 

And what's with "It's About Light" being written in almost every other post you write (besides your signature bearing a link to your website.) Is that just a plug for your workshops? Or more of a slogan?

 

... and the link is out... i didn't think much about it nor its ethical infridgement... thank you and my apologies.

"Its about Light" is just a slogan I like.

Share this post


Link to post
Share on other sites
Kubrick did it at ASA 200 (100 pushed a stop) and F0.7 so we should be able to do it with fast lenses on 500 speed stock. I bet 5229 would do it beautifully.

 

There's no reason white skintone HAS to be around zone six, either. I see lots of times in real life where it's much darker and I don't doubt reality. You're very classical-studio-inluenced aren't you? ;)

 

There is no reason for skin tone to be at VI... you are right.... I never thought it had to be.

Share this post


Link to post
Share on other sites
... and the link is out... i didn't think much about it nor its ethical infridgement... thank you and my apologies.

 

Oh, I didn't have a problem with the link, PLUG PLUG AWAY! Just wondering why you liked to use it so much :)

Share this post


Link to post
Share on other sites
Oh, I didn't have a problem with the link, PLUG PLUG AWAY! Just wondering why you liked to use it so much :)

 

... is cool, jonathan

thanks

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  


  • Media Blackout - Custom Cables and AKS



    Paralinx LLC



    Just Cinema Gear



    Visual Products



    Ritter Battery



    Glidecam



    FJS International



    G-Force Grips



    Gamma Ray Digital Inc



    Abel Cine



    Serious Gear



    Rig Wheels Passport



    Tai Audio



    Metropolis Post



    CineLab



    Broadcast Solutions Inc



    Wooden Camera



    New Pro Video - New and Used Equipment


×
×
  • Create New...