Richard Lacey Posted May 1, 2010 Share Posted May 1, 2010 (edited) I'm shooting a film next week that has a scene in a hospital ward. I was thinking of using the fluorescent ceiling lights that are already there to light the background and lighting the actors with a kino flo. We're shooting for black and white so I really want the actors to pop out against the background. Will there be any issue with flicker from the fluorescent lights? I'm based in Ireland and we'll be shooting at 25 fps. Edited May 1, 2010 by Richard Lacey Link to comment Share on other sites More sharing options...
Premium Member David Mullen ASC Posted May 1, 2010 Premium Member Share Posted May 1, 2010 I'm shooting a film next week that has a scene in a hospital ward. I was thinking of using the fluorescent ceiling lights that are already there to light the background and lighting the actors with a kino flo. We're shooting for black and white so I really want the actors to pop out against the background. Will there be any issue with flicker from the fluorescent lights? I'm based in Ireland and we'll be shooting at 25 fps. If you are shooting with a crystal sync motor at 25 fps under 50 Hz AC lights, you should be fine except for the occasional light with a bad ballast in it. Link to comment Share on other sites More sharing options...
Premium Member John Sprung Posted May 1, 2010 Premium Member Share Posted May 1, 2010 It also depends if they still have magnetic ballasts. Over here, they're a thing of the past. The electronic ballast flourescents are high enough frequency not to cause any problem at any reasonable frame rate and shutter angle -- like CFL's. We had a shoot in Thailand recently, and were worried about old magnetic ballasts. It turned out that they're even gone over there. Of course you may find a tube going bad here and there. But those you can see just by eye, and pull them out or replace them. -- J.S. Link to comment Share on other sites More sharing options...
Richard Lacey Posted May 1, 2010 Author Share Posted May 1, 2010 (edited) If you are shooting with a crystal sync motor at 25 fps under 50 Hz AC lights, you should be fine except for the occasional light with a bad ballast in it. Thanks for the replies. We're shooting with an Aaton LTR. I wasn't previously familiar with crystal sync motors, but given the age and condition of my college's camera I'm guessing it won't have one. Edited May 1, 2010 by Richard Lacey Link to comment Share on other sites More sharing options...
Premium Member John Sprung Posted May 1, 2010 Premium Member Share Posted May 1, 2010 The LTR's are new enough that most if not all are probably crystal. Do you do sync sound without a hard wire from the camera to the recorder? If so, it has to be crystal. If the ballasts are electronic, it wouldn't matter either way. -- J.S. Link to comment Share on other sites More sharing options...
Brian Drysdale Posted May 1, 2010 Share Posted May 1, 2010 Thanks for the replies. We're shooting with an Aaton LTR. I wasn't previously familiar with crystal sync motors, but given the age and condition of my college's camera I'm guessing it won't have one. The Aaton LTRs have crystal sync. I'd be more worried about the green in the fluorescents than the flicker if you're shooting at 25 f.p.s with a crystal motor. Link to comment Share on other sites More sharing options...
Premium Member John Sprung Posted May 2, 2010 Premium Member Share Posted May 2, 2010 Actually he's lucky on that one -- shooting B&W, so the green won't be an issue. -- J.S. Link to comment Share on other sites More sharing options...
julie kain Posted May 5, 2010 Share Posted May 5, 2010 Hi, There are many types in fluorescent lights like Compact Fluorescent Bulb, Fluorescent Deluxe Floodlight, Fluorescent Portable Worklight, Fluorescent Worklight, 65 Watt Fluorescent Twin head Worklight and more. Try any of these if you are interested. Link to comment Share on other sites More sharing options...
Richard Lacey Posted May 6, 2010 Author Share Posted May 6, 2010 I decided not to risk using the overhead fluorescents. Instead I lit it with a 4 bank kino, an Arri 1K and 3 150w Dedolights. It looked pretty good on the day. Here's hoping the rushes look good! Link to comment Share on other sites More sharing options...
Brian Drysdale Posted May 6, 2010 Share Posted May 6, 2010 Actually he's lucky on that one -- shooting B&W, so the green won't be an issue. -- J.S. Speed read past that bit. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now