Marc Roessler Posted December 16, 2012 Share Posted December 16, 2012 Hi everyone, I just bought hetron video synchronizer (vsf 151, pickup unit and sync/phase box) for quite cheap from ebay (from a reputable seller, luckily). You can use it to phase sync your camera to CRT displays. The synchronizer came with a cable for an Arri SR3 (hetron 8 pin (Lemo) to Arri Fischer connector), but I'd like to use it with my XTR Prod. Now I'm wondering: #1 where does it connect at the Aaton? The sub-d 9 pin plastic video sync connector or the Lemo 8 pin speed controller connector? #2 what's the pinout of the 8 pin lemo connector at the hetron? Is it the same as with the XTRProd so I just can connect it one to one, or do some pins need to be re-routed? If someone knows the Pinout of the ARRI Fischer connector I can use that info to measure the cable using a multimeter and determine the pinout like that. #3 Has anyone got a manual for the hetron, or ever used one? Thanks, Marc Link to comment Share on other sites More sharing options...
peter roehsler Posted December 17, 2012 Share Posted December 17, 2012 Hi, just write to Ernst, who is the guy who made it: office at hetron dot at. Link to comment Share on other sites More sharing options...
Daimen Lee Posted January 8, 2013 Share Posted January 8, 2013 Hey Marc, we are the most of professional manufacturer of push-pull connectors in China,which are compatible with Lemo,Fischer and ODU connector,with good quality and very economic price. regards, Daimen www.touch-sz.com Link to comment Share on other sites More sharing options...
Daimen Lee Posted January 8, 2013 Share Posted January 8, 2013 pls feel free to contact with me ,my email is sale4@touch-sz.com Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now