Jump to content

Odd SR3 issue


Tyler Purcell

Recommended Posts

  • Premium Member

So got an SR3 that worked fine, shipped it to a customer and now it doesn't. We're thinking something came loose in transit, but he is using a different power system then I'm using.

Basically, the camera runs fine, but the display shows the image attached to this post. The Arri glow doesn't work and the 12v power output box isn't supplying power to the video tap.

 

The best guess we have so far is that one of the fuses is blown.

 

Any other ideas?

 

Thanks!

 

 

post-30872-0-82949500-1498438177_thumb.jpg

Link to comment
Share on other sites

  • Premium Member

Not familiar with that error readout, the U on the bottom line is associated with a voltage reading in one of the modes, so could be a fault in the power circuit. Fuses are easy enough to check and replace, but shouldn't blow in transit, only if there was excessive draw or reverse polarity on the accessory socket or power input.

Link to comment
Share on other sites

  • Premium Member

Back when I was working on SR3s I would hand this problem to the electronics tech.. :)

 

The next place to look is the main board.. but electronics is not my area of expertise.

Link to comment
Share on other sites

  • 2 years later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...