Jump to content
Adam Paul

Has anybody here repaired the Sony PL lenses?

Recommended Posts

I have a Sony PL lens which has a stuck iris ring. I tried opening it but it's a strange thing. I didn't get far. I know this is a long shot. But has anybody tried servicing them? I'm talking the ones which came with the F3.

Share this post


Link to post
Share on other sites

I"ve worked on a few.. but I wouldn't recommend trying to fix this yourself.

 

The iris ring on lenses like these is simply a ring that actuates an internal lever that then connects to the iris itself. Often the iris moves as you focus, so the internal lever moves with it, sliding through a prong connected to the outer ring. The outer ring part rarely jams, because it's just a ring in a controlled gap, and it's very unlikely the grease has hardened in the few years since these lenses were made. So if there is a jam, it is almost certainly the internal lever mechanism or the iris itself. If it is the iris, you risk permanently damaging the blades if you try to force it. Getting in there requires fairly extensive experience if you want the lens to work properly after re-assembly.

 

The only other possibility is that the lens has been dropped and the housing is deformed, in which case you can't fix it yourself because you need new parts.

Share this post


Link to post
Share on other sites

Thanks for the reply. So you have specifically worked on a few Sony F3 PL lenses? You think they are difficult to service and work on as compared to other PL lenses?

 

In my case I don't have much to lose. The lens was damaged during transport. The iris ring is cracked on the external. It was working when it arrived but not smoothly. Then it just kind of clicked in place and got stuck in the fully closed position. That happened as I was testing it once I saw the ring was cracked after I took it out of the box.

 

Since the seller ended up refunding me the money and telling me I could keep the broken lens, I don't have much to lose in trying to open it myself and see if I can repair it. As it is now it's just a big paper weight.

 

If you have experience with these lenses and could guide me to at least get to the iris I would appreciated it. I took the surface crews off but couldn't get in the lens and decided to screw it back and ask for hep instead.

 

Like I said I don't have much to lose and could even learn something in the process. Thanks.

Share this post


Link to post
Share on other sites

Actually I've only worked on the Cine Alta Sony primes, I see that the F3 lenses were different.

 

Do they have LDS contacts? That makes it trickier, since you have electrical ribbons, circuit boards and position sensing components in among the mechanics. You should be able to remove the mount and the ring below it to access the iris ring, but you may need to unlatch a ribbon to the LDS contacts. Take some photos.

Share this post


Link to post
Share on other sites

Yes, it has the LDS contacts. But I don't care if they get damaged to be honest. Don't use it. I took all rings which had screws off. But they were just covers of sort it seems. The iris ring itself still won't come off and I see no more screws on it. Good news is I can see what the problem is inside through the gap. If I can take the iris ring off I may be able to repair it. I will try to take pictures but it's hard to show it.

Share this post


Link to post
Share on other sites

Sometimes rings need to screw off, using a rubber friction ring as a tool. It's also possible the iris ring needs to be turned to a certain point to lift it off. Photos always help.

Share this post


Link to post
Share on other sites

OK, I took some photos. I sent them directly to you, so they can be large enough to see the details. I hope it's ok to reach out directly. I sent to your gmail account. Thanks.

Share this post


Link to post
Share on other sites

OK, I took some photos. I sent them directly to you, so they can be large enough to see the details. I hope it's ok to reach out directly. I sent to your gmail account. Thanks.

Be nice to put them up here as well. There are a few geeks here, I think. At least one.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Tai Audio



    Just Cinema Gear



    Visual Products



    Metropolis Post



    Serious Gear



    FJS International



    G-Force Grips



    Gamma Ray Digital Inc



    Paralinx LLC



    Abel Cine



    New Pro Video - New and Used Equipment



    Ritter Battery



    Wooden Camera



    Broadcast Solutions Inc



    Media Blackout - Custom Cables and AKS



    Glidecam



    Rig Wheels Passport



    CineLab


×
×
  • Create New...