Joao de Botelho Posted November 25, 2018 Author Share Posted November 25, 2018 Hi Simon, here is a test I think can help further the diagnosis... https://wetransfer.com/downloads/b1c0761bc25a2545b91a25e021851ef620181125125839/6f252a928adb71c16bb55566969cccb120181125125839/392359 Thank you so much for all the help! Link to comment Share on other sites More sharing options...
Premium Member Simon Wyss Posted November 25, 2018 Premium Member Share Posted November 25, 2018 With the fourth video you run the camera without film and fumble on the pressure unit with the finger. Something could be askew with the claw cover. Undo the two screws that retain the claw cover plate, remove plate and inspect it for flatness. Dress, if not flat. Place it on a flat piece of wood and tap a small wooden stud on it with a little hammer. It can get bent when the pressure unit is open and the lid is forced onto the camera. The pressure plate is checked with a straight edge. A local mechanic could help you out. Only one last dumb question from my side. You had the negative scanned, not a print? Link to comment Share on other sites More sharing options...
Joao de Botelho Posted November 25, 2018 Author Share Posted November 25, 2018 I did Simon! the thing here is I don't dare to do this kind of work without an experienced technician by my side =/ Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now