What mount is this Angenieux 12-120mm?

[Luke Ogden]

I originally hoped it was Bolex Bayonet mount, but the protrusion of the back element and size of the bayonet tabs (sligthly smaller than bolex) lead me to think maybe it's B4 mount. But then, shouldn't one of the tabs have a pin instead of a notch, like a PV lens. 

Any help ID'ing this one would be welcome. 

[Bruce Greene]

It looks to me like a mount for the CP (cinema products) 16mm camera.  And it says "cinema products" right on the lens mount ?

[Dom Jaeger]

Yep, it's a CP-16 mount. You can get adapters to things like Micro 4/3 or C mount.

[Luke Ogden]

Yep, seems painfully obvious now.  ?As you might expect a search for 'cinema products' jut threw up pretty much everything. 

[Fredrik Fossum Hallerud]

Hi, all!

Do any of you know where I can find a adapter to PL for this CP-16 mount?

[Dom Jaeger]

PL flange depth is deeper than CP, so the lens CP mount would need to sit inside the camera PL mount to achieve infinity focus. Adapting is therefore not possible. 

[Robert Hart]

If that is a 12-120 Angenieux zoom, then Ken Hale at Whitehouse AV was doing PL-Mount tails for them and the Angeniuex 10-150 as few years ago. If you end up getting hold of one for the Angenieux lenses and fitting it yourself, you may experience difficulty with aperture ring clearance on some lenses. Ken also did a different PL-Mount for the new-old-stock Angeniuex "Compact" zoom lenses left over from the production run of the CP-CSMO cameras.