Youngjae Lih Posted November 21, 2020 Share Posted November 21, 2020 Of course it might be dependent measurement, I want to hear others experiences. While making some experiment, I made some print stock with Orwo pf2(black and white), which I understand polyester stock. Indeed I am very impressed its durableness in general also after I glued some parts with superglue. So I wonder how much polyester base stable physically and chemically and to make some experiment if there are any feasible way to manipulating film more chemically rather than physical method such as tinting, destroying emulsion layer..so on. It seem I need to play with negative (acetate) then move to print stock is the way to go but want to ask others in case. Link to comment Share on other sites More sharing options...
Premium Member David Mullen ASC Posted November 21, 2020 Premium Member Share Posted November 21, 2020 When Estar base first came out, Kodak claimed you could tow a car behind a truck with it... 1 1 Link to comment Share on other sites More sharing options...
Youngjae Lih Posted November 21, 2020 Author Share Posted November 21, 2020 wow, thank you. That says alot. Link to comment Share on other sites More sharing options...
Premium Member Satsuki Murashige Posted November 21, 2020 Premium Member Share Posted November 21, 2020 Well, if polyester-based film jams in your camera, it will wreck the movement instead of tearing like acetate film. So it’s pretty strong! 1 1 Link to comment Share on other sites More sharing options...
Premium Member Charles MacDonald Posted November 21, 2020 Premium Member Share Posted November 21, 2020 yes, try to snap Poly film, and you will likely hurt your hand instead. Polyester base Microfilm is rated to last 500 years or more. Polyester is resistant to most chemicals. and can take a lot of heat before it melts. you can play with the emulsion chemically, although it is a similar gelatin coating to that found on acetate base film. One person who used to be associated with Ilford noted that they had a jam on their coating machine while coating some Polyester film, and the machine had to have Bent and Broken Steel Parts replaced. 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now