Jump to content

Arriflex SR2 Viewfinder Cleaning


Deniz Cooper

Recommended Posts

Hi,

Thank you for all the answers of my last topic. 

Now I have a question regarding the viewfinder of my SR2. There are some dirty spots in the frame when I look through it. The lens is clean so it must be the viewfinder. How can I clean it? Can I open / unscrew it from the body? Any recommendations? ?

Thanks for reading,

D.C.

Link to comment
Share on other sites

  • Premium Member

There are a number of places within the viewfinder system where dirt specks could become visible, but most often it’s either on the surfaces where the eyepiece joins the viewfinder, on the optic just above the groundglass, or on the groundglass itself (Arri sometimes calls it a fibre screen).

You can easily unscrew the eyepiece lock ring and remove the eyepiece to clean those surfaces, and you can also remove the groundglass to blow specks off it with a blower. (The groundglass removal process is described in the manual and is best done with Hirschman forceps - like tweezers with a grabbing claw). Avoid touching the groundglass surface as it’s easily damaged.

The other parts of the viewfinder are too difficult to access without specialist tools and knowledge, so if the dirt remains visible you can either live with it or take the camera to an experienced Arri technician for cleaning.

Link to comment
Share on other sites

  • Premium Member

It should just unscrew, from memory clockwise when looking from the eyepiece side (ie the ring is captive on the camera side and screws onto the eyepiece). It’s the knurled silver ring furthest from the eyepiece, not the thinner black ring that locks the diopter adjustment. Check the manual if in doubt.

Link to comment
Share on other sites

  • Premium Member

Yes, A.

Shouldn't need a tool unless someone over-tightened it, then you might need a small rubber jar opening tool or someone with a strong grip. ? Or last resort, a pipe wrench with a rubber strip wrapped around the lock ring to protect it.

Link to comment
Share on other sites

  • Premium Member

The eyepiece (B) will remain stationary, it is keyed in place, but the chrome ring (A) turns clockwise (viewed from behind the camera looking thru the eyepiece). 

I would also check the fibre-optics screen/groundglass, if the dirty spots in the frame are sharp when looking thru the eyepiece.

Best, -Tim

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...