Jon Salimes Posted February 19, 2021 Share Posted February 19, 2021 I was hoping to get some suggestions on best brands and places to purchase. I don't really need anything super high quality - I'm actually pretty okay with using the viewfinder but when I'm working with a crew, it can be limiting being the only person seeing what we're shooting. Plus I think my focusing would be sharper with an external monitor. Here's an image of the connectors I have on the camera (not really sure what these are, ha, if someone could illuminate me that would be great!): Link to comment Share on other sites More sharing options...
Premium Member Tyler Purcell Posted February 20, 2021 Premium Member Share Posted February 20, 2021 (edited) I can't quite tell what camera it is, can you tell us a bit more about it? Also, there really aren't a bunch of companies making taps. Even the modern HD taps, can't be used to insure proper focus. The viewfinder is really the only way to insure get focus on a film camera. They only make modern taps for more modern cameras too. Edited February 20, 2021 by Tyler Purcell Link to comment Share on other sites More sharing options...
Premium Member Dom Jaeger Posted February 20, 2021 Premium Member Share Posted February 20, 2021 Hard to recommend anything without knowing the camera, format etc. Those connectors look like a Hirose 4 pin for power and a BNC output for video (probably SD). Reminds me of the old SD splits we had for SRs at a rental house I worked for years ago. So it looks like your camera already has a video assist? As Tyler said, even HD film camera video splits are not really good enough for accurate focus pulling, just framing. Especially if you’re not after anything high quality. Visual Products sell good video split options for various cameras. Link to comment Share on other sites More sharing options...
Jon Salimes Posted February 20, 2021 Author Share Posted February 20, 2021 2 hours ago, Tyler Purcell said: I can't quite tell what camera it is, can you tell us a bit more about it? Also, there really aren't a bunch of companies making taps. Even the modern HD taps, can't be used to insure proper focus. The viewfinder is really the only way to insure get focus on a film camera. They only make modern taps for more modern cameras too. Oh sorry! Yes, it's a CP-16R. Link to comment Share on other sites More sharing options...
Jon Salimes Posted February 20, 2021 Author Share Posted February 20, 2021 2 hours ago, Dom Jaeger said: Hard to recommend anything without knowing the camera, format etc. Those connectors look like a Hirose 4 pin for power and a BNC output for video (probably SD). Reminds me of the old SD splits we had for SRs at a rental house I worked for years ago. So it looks like your camera already has a video assist? As Tyler said, even HD film camera video splits are not really good enough for accurate focus pulling, just framing. Especially if you’re not after anything high quality. Visual Products sell good video split options for various cameras. It's a CP-16R. Yes, sorry, the video assist is installed and was part of the package (I actually bought it from Visual Products). I guess I don't even quite understand what I'm asking, ha. Where would I go about getting a video screen that would work with these connectors? Link to comment Share on other sites More sharing options...
Premium Member Dom Jaeger Posted February 20, 2021 Premium Member Share Posted February 20, 2021 38 minutes ago, Jon Salimes said: It's a CP-16R. Yes, sorry, the video assist is installed and was part of the package (I actually bought it from Visual Products). I guess I don't even quite understand what I'm asking, ha. Where would I go about getting a video screen that would work with these connectors? I would ask Visual Products, but generally you'd use a mini monitor. BNC connections for video are common, but if it's an SD output you generally need to use an older SD mini monitor or use a convertor box. But ask VP, since they sold it to you, so they should know a compatible monitor and also have a power cable with the right connector and wiring to power the assist. Link to comment Share on other sites More sharing options...
Jon Salimes Posted February 20, 2021 Author Share Posted February 20, 2021 9 minutes ago, Dom Jaeger said: I would ask Visual Products, but generally you'd use a mini monitor. BNC connections for video are common, but if it's an SD output you generally need to use an older SD mini monitor or use a convertor box. But ask VP, since they sold it to you, so they should know a compatible monitor and also have a power cable with the right connector and wiring to power the assist. Thank you! Link to comment Share on other sites More sharing options...
Premium Member Tyler Purcell Posted February 20, 2021 Premium Member Share Posted February 20, 2021 2 hours ago, Jon Salimes said: I guess I don't even quite understand what I'm asking, ha. Where would I go about getting a video screen that would work with these connectors? Oh you need a monitor. That left connector is standard it’s called BNC. The camera produces an SD (standard definition) analog signal. So any cheap NTSC monitor should work fine. The right connector is power and it’s generally a special cable. Tho I’ve never seen a tap like that on the CP before, not sure if it’s externally powered or not. Maybe gotta dig in the package from VP. It should be in there if it’s required. Link to comment Share on other sites More sharing options...
Premium Member Satsuki Murashige Posted February 20, 2021 Premium Member Share Posted February 20, 2021 If your video tap is analog standard definition, then you will need a monitor (or wireless transmitter) that can accept an analog composite video signal. Usually, this will be an older model like a TVLogic 5.6WP, TVLogic LVM-074, Panasonic 1700/1710/1760, or an older Marshall 7” monitor. Newer monitors are generally HD-SDI (digital) only, so they won’t work without an analog to digital converter box. Don’t assume that your video tap is NTSC - it most likely is if Visual Products made it, but there are a lot of PAL taps out there too. Best to make sure before you invest in a new monitor. The other connector is a Hirose 4-pin, as Dom says. Usually used to provide 12v power on broadcast style cameras. You tend to see them on Sony and Panasonic cameras. So it appears likely that you need to provide external power to the tap camera. I would double check with Visual Products to see what is needed. Link to comment Share on other sites More sharing options...
Jon Salimes Posted February 23, 2021 Author Share Posted February 23, 2021 Thanks for the info! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now