andres victorero Posted March 6, 2009 Share Posted March 6, 2009 I had a problem with my arri 35-3, the camera runs but sometimes when the i turn off the switch, the shutter do not stop in the right position. Then if i want to switch on the camera, then it doesn´t run. I need to move the shutter (and then the shutter runs itself around 300-360 degree) and the camera runs again (when I switch on, of course). Sometimes I need to move the shutter twice or more to the camera runs again. I would be happy to know if is a common issue with arri 35-3 cameras and if it is a expensive repair. Thanks in advance Link to comment Share on other sites More sharing options...
Delorme Jean-Marie Posted March 6, 2009 Share Posted March 6, 2009 hi what is sure is that it's NOT a comon issue first thing will be to chek is the timing of your camera is still good : point the camera to a tv set and watch the bar scrolling down on a video monitor if it scrolls with regularity it means your timing is goog. the problem shoold be around the miror mechanism when you stop the camera the mirror should close so you can see a image on the viewfinder good luck but you should take the body to a rental house anyway Link to comment Share on other sites More sharing options...
Thibaut de Chemellier Posted January 9, 2010 Share Posted January 9, 2010 Hi, Sounds like a motor issue to me, you should check it out by a technicians...but maybe you've solved this issue yet... Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now