petersant Posted May 6, 2010 Share Posted May 6, 2010 Hi All, I have finished editing and sent of the neg to be cut with a cutting list fom FCP. However, the neg cutter wants an EDL not a Cutting list based on the Key numbers. This is where I'm stuck. Ok so here is what I've done so far. Shot 16mm @ 24fps Transfered at 25fps with FLEx files (camera rolls and timecode) plus burn-ins Inputed FLEx files into Cinema Tools and batch captured in FCP Conformed the footage to 24 in Cinema Tools Edited with sequence settings at DV PAL 48kHz - 24 So I managed to output a cutting list from FCP with the Keycode and checked it with the footage. 99% was ok but 1 frame out in 2 of the 140 shots. Now the Neg cutter wants a timecode EDL. How do I now output timecode EDL? Was I right to conform to 24 or shall I reconform to 25? Please, please help this is for my final work on my MA and can't afford to have it go wrong. Many thanks in advance, Link to comment Share on other sites More sharing options...
Andres Pardo aka Gral Treegan Posted May 25, 2010 Share Posted May 25, 2010 Hi!! you nedd to gave the neg cutter the following 1- DVD or Qt of the film with visible TC 2- Source EDL the source edl is a list of all youre cuts in the order that thay were transfred. to export it go to file menu in fcp > export > edl and the choose source mode Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now